[PATCH] arm64: dts: renesas: r8a779a0: Restore sort order
Geert Uytterhoeven
geert+renesas at glider.be
Wed Jun 23 07:59:25 PDT 2021
The thermal node was inserted at the wrong place, breaking sort order
(sort by unit address, but group nodes of the same type).
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
Probably it was my fault, not Niklas' ;-)
To be queued in renesas-devel for v5.15.
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 26 +++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index a7dfade1801a87db..3676b2bd3d646cdb 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -327,6 +327,19 @@ sysc: system-controller at e6180000 {
#power-domain-cells = <1>;
};
+ tsc: thermal at e6190000 {
+ compatible = "renesas,r8a779a0-thermal";
+ reg = <0 0xe6190000 0 0x200>,
+ <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>,
+ <0 0xe61a8000 0 0x200>,
+ <0 0xe61b0000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
tmu0: timer at e61e0000 {
compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
reg = <0 0xe61e0000 0 0x30>;
@@ -392,19 +405,6 @@ tmu4: timer at ffc00000 {
status = "disabled";
};
- tsc: thermal at e6190000 {
- compatible = "renesas,r8a779a0-thermal";
- reg = <0 0xe6190000 0 0x200>,
- <0 0xe6198000 0 0x200>,
- <0 0xe61a0000 0 0x200>,
- <0 0xe61a8000 0 0x200>,
- <0 0xe61b0000 0 0x200>;
- clocks = <&cpg CPG_MOD 919>;
- power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 919>;
- #thermal-sensor-cells = <1>;
- };
-
i2c0: i2c at e6500000 {
compatible = "renesas,i2c-r8a779a0",
"renesas,rcar-gen3-i2c";
--
2.25.1
More information about the linux-arm-kernel
mailing list