[PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information

[Alim Akhtar]

Hello Krzysztof

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> Sent: 21 June 2021 14:22
> To: Alim Akhtar <alim.akhtar at samsung.com>; linux-kernel at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; robh+dt at kernel.org
> Cc: linux-samsung-soc at vger.kernel.org
> Subject: Re: [PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information
> 
> On 17/06/2021 13:37, Alim Akhtar wrote:
> > This patch adds cpu caches information to its dt nodes so that the
> > same is available to userspace via sysfs.
> > This SoC has 48/32 KB I/D cache for each A57 cores with 2MB L2 cache.
> > And 32/32 KB I/D cache for each A53 cores with 256KB L2 cache.
> >
> > Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
> > ---
> >  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70
> > ++++++++++++++++++++++
> >  1 file changed, 70 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> > b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> > index 18a912eee360..8183a59e9046 100644
> > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> > @@ -62,6 +62,13 @@
> >  			clock-names = "apolloclk";
> >  			operating-points-v2 = <&cluster_a53_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0x8000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&apollo_l2>;
> >  		};
> >
> >  		cpu1: cpu at 101 {
> > @@ -72,6 +79,13 @@
> >  			clock-frequency = <1300000000>;
> >  			operating-points-v2 = <&cluster_a53_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0x8000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&apollo_l2>;
> >  		};
> >
> >  		cpu2: cpu at 102 {
> > @@ -82,6 +96,13 @@
> >  			clock-frequency = <1300000000>;
> >  			operating-points-v2 = <&cluster_a53_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0x8000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&apollo_l2>;
> >  		};
> >
> >  		cpu3: cpu at 103 {
> > @@ -92,6 +113,13 @@
> >  			clock-frequency = <1300000000>;
> >  			operating-points-v2 = <&cluster_a53_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0x8000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <128>;
> > +			next-level-cache = <&apollo_l2>;
> >  		};
> >
> >  		cpu4: cpu at 0 {
> > @@ -104,6 +132,13 @@
> >  			clock-names = "atlasclk";
> >  			operating-points-v2 = <&cluster_a57_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0xc000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <256>;
> > +			next-level-cache = <&atlas_l2>;
> >  		};
> >
> >  		cpu5: cpu at 1 {
> > @@ -114,6 +149,13 @@
> >  			clock-frequency = <1900000000>;
> >  			operating-points-v2 = <&cluster_a57_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0xc000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <256>;
> > +			next-level-cache = <&atlas_l2>;
> >  		};
> >
> >  		cpu6: cpu at 2 {
> > @@ -124,6 +166,13 @@
> >  			clock-frequency = <1900000000>;
> >  			operating-points-v2 = <&cluster_a57_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0xc000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <256>;
> > +			next-level-cache = <&atlas_l2>;
> >  		};
> >
> >  		cpu7: cpu at 3 {
> > @@ -134,6 +183,27 @@
> >  			clock-frequency = <1900000000>;
> >  			operating-points-v2 = <&cluster_a57_opp_table>;
> >  			#cooling-cells = <2>;
> > +			i-cache-size = <0xc000>;
> > +			i-cache-line-size = <64>;
> > +			i-cache-sets = <256>;
> > +			d-cache-size = <0x8000>;
> > +			d-cache-line-size = <64>;
> > +			d-cache-sets = <256>;
> > +			next-level-cache = <&atlas_l2>;
> > +		};
> > +
> > +		atlas_l2: l2-cache0 {
> 
> Few other nodes (PMU, OPP tables) use a57/a53 names instead of
> codenames, so I would prefer to stay with them (so cluster_a57_l2).
> 
Thanks for review, will update in next patch set.

> For Exynos7 it's fine as it uses Atlas already in labels.
> 
> > +			compatible = "cache";
> > +			cache-size = <0x200000>;
> > +			cache-line-size = <64>;
> > +			cache-sets = <2048>;
> > +		};
> > +
> > +		apollo_l2: l2-cache1 {
> > +			compatible = "cache";
> > +			cache-size = <0x40000>;
> > +			cache-line-size = <64>;
> > +			cache-sets = <256>;
> >  		};
> >  	};
> >
> >
> 
> 
> Best regards,
> Krzysztof