[PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information

[Krzysztof Kozlowski]

On 17/06/2021 13:37, Alim Akhtar wrote:
> This patch adds cpu caches information to its dt
> nodes so that the same is available to userspace
> via sysfs.
> This SoC has 48/32 KB I/D cache for each A57 cores
> with 2MB L2 cache.
> And 32/32 KB I/D cache for each A53 cores with
> 256KB L2 cache.
> 
> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 18a912eee360..8183a59e9046 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -62,6 +62,13 @@
>  			clock-names = "apolloclk";
>  			operating-points-v2 = <&cluster_a53_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&apollo_l2>;
>  		};
>  
>  		cpu1: cpu at 101 {
> @@ -72,6 +79,13 @@
>  			clock-frequency = <1300000000>;
>  			operating-points-v2 = <&cluster_a53_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&apollo_l2>;
>  		};
>  
>  		cpu2: cpu at 102 {
> @@ -82,6 +96,13 @@
>  			clock-frequency = <1300000000>;
>  			operating-points-v2 = <&cluster_a53_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&apollo_l2>;
>  		};
>  
>  		cpu3: cpu at 103 {
> @@ -92,6 +113,13 @@
>  			clock-frequency = <1300000000>;
>  			operating-points-v2 = <&cluster_a53_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&apollo_l2>;
>  		};
>  
>  		cpu4: cpu at 0 {
> @@ -104,6 +132,13 @@
>  			clock-names = "atlasclk";
>  			operating-points-v2 = <&cluster_a57_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0xc000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <256>;
> +			next-level-cache = <&atlas_l2>;
>  		};
>  
>  		cpu5: cpu at 1 {
> @@ -114,6 +149,13 @@
>  			clock-frequency = <1900000000>;
>  			operating-points-v2 = <&cluster_a57_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0xc000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <256>;
> +			next-level-cache = <&atlas_l2>;
>  		};
>  
>  		cpu6: cpu at 2 {
> @@ -124,6 +166,13 @@
>  			clock-frequency = <1900000000>;
>  			operating-points-v2 = <&cluster_a57_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0xc000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <256>;
> +			next-level-cache = <&atlas_l2>;
>  		};
>  
>  		cpu7: cpu at 3 {
> @@ -134,6 +183,27 @@
>  			clock-frequency = <1900000000>;
>  			operating-points-v2 = <&cluster_a57_opp_table>;
>  			#cooling-cells = <2>;
> +			i-cache-size = <0xc000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <256>;
> +			next-level-cache = <&atlas_l2>;
> +		};
> +
> +		atlas_l2: l2-cache0 {

Few other nodes (PMU, OPP tables) use a57/a53 names instead of
codenames, so I would prefer to stay with them (so cluster_a57_l2).

For Exynos7 it's fine as it uses Atlas already in labels.

> +			compatible = "cache";
> +			cache-size = <0x200000>;
> +			cache-line-size = <64>;
> +			cache-sets = <2048>;
> +		};
> +
> +		apollo_l2: l2-cache1 {
> +			compatible = "cache";
> +			cache-size = <0x40000>;
> +			cache-line-size = <64>;
> +			cache-sets = <256>;
>  		};
>  	};
>  
> 


Best regards,
Krzysztof