[PATCH v2 1/2] arm64: dts: ti: am65: align ti, pindir-d0-out-d1-in property with dt-shema

[Vignesh Raghavendra]

On 6/8/21 10:44 AM, Aswath Govindraju wrote:
> ti,pindir-d0-out-d1-in property is expected to be of type boolean.
> Therefore, fix the property accordingly.
> 
> Fixes: e180f76d0641 ("arm64: dts: ti: Add support for Siemens IOT2050 boards")
> Fixes: 5da94b50475a ("arm64: dts: ti: k3-am654: Enable main domain McSPI0")
> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 +-
>  arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index f4ec9ed52939..23d51b6a9cf2 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -575,7 +575,7 @@
>  
>  	#address-cells = <1>;
>  	#size-cells= <0>;
> -	ti,pindir-d0-out-d1-in = <1>;
> +	ti,pindir-d0-out-d1-in;
>  };
>  
>  &tscadc0 {
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index eddb2ffb93ca..1b947e2c2e74 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -299,7 +299,7 @@
>  	pinctrl-0 = <&main_spi0_pins_default>;
>  	#address-cells = <1>;
>  	#size-cells= <0>;
> -	ti,pindir-d0-out-d1-in = <1>;
> +	ti,pindir-d0-out-d1-in;
>  
>  	flash at 0{
>  		compatible = "jedec,spi-nor";


Reviewed-by: Vignesh Raghavendra <vigneshr at ti.com>


Regards
Vignesh