[PATCH v2 1/2] arm64: dts: ti: am65: align ti, pindir-d0-out-d1-in property with dt-shema

[Aswath Govindraju]

Hi Jan,

On 08/06/21 10:50 am, Jan Kiszka wrote:
> On 08.06.21 07:14, Aswath Govindraju wrote:
>> ti,pindir-d0-out-d1-in property is expected to be of type boolean.
>> Therefore, fix the property accordingly.
>>
> 
> Is there a patch for Documentation/devicetree/bindings/spi/omap-spi.txt
> on the way as well that makes this even clearer?
> 

Yes, these fixes are a part of conversion of omap-spi.txt to yaml
format. In the yaml file the type for the property is mentioned.

Link to yaml conversion patch,
https://lore.kernel.org/patchwork/project/lkml/list/?series=503240

>> Fixes: e180f76d0641 ("arm64: dts: ti: Add support for Siemens IOT2050 boards")
>> Fixes: 5da94b50475a ("arm64: dts: ti: k3-am654: Enable main domain McSPI0")
>> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
>> ---
>>  arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 +-
>>  arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 2 +-
>>  2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
>> index f4ec9ed52939..23d51b6a9cf2 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
>> @@ -575,7 +575,7 @@
>>  
>>  	#address-cells = <1>;
>>  	#size-cells= <0>;
>> -	ti,pindir-d0-out-d1-in = <1>;
>> +	ti,pindir-d0-out-d1-in;
>>  };
>>  
> 
> Acked-by: Jan Kiszka <jan.kiszka at siemens.com>
> 

Thanks,
Aswath

> Jan
> 
>>  &tscadc0 {
>> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
>> index eddb2ffb93ca..1b947e2c2e74 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
>> @@ -299,7 +299,7 @@
>>  	pinctrl-0 = <&main_spi0_pins_default>;
>>  	#address-cells = <1>;
>>  	#size-cells= <0>;
>> -	ti,pindir-d0-out-d1-in = <1>;
>> +	ti,pindir-d0-out-d1-in;
>>  
>>  	flash at 0{
>>  		compatible = "jedec,spi-nor";
>>
> 
>