[PATCH v2 04/10] dt-bindings: pwm: Add bindings for PWM function in Netronix EC

[Rob Herring]

On Tue, Sep 15, 2020 at 12:24 AM Andreas Kemnade <andreas at kemnade.info> wrote:
>
> Hi,
>
> On Mon, 14 Sep 2020 18:54:43 -0600
> Rob Herring <robh at kernel.org> wrote:
>
> > On Sat, Sep 05, 2020 at 03:32:24PM +0200, Jonathan Neuschäfer wrote:
> > > The Netronix embedded controller as found in Kobo Aura and Tolino Shine
> > > supports one PWM channel, which is used to control the frontlight
> > > brightness on these devices.
> > >
> > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
> > > ---
> > >
> > > v2:
> > > - Add plaintext binding to patch description, for comparison
> > > - Fix pwm-cells property (should be 2, not 1)
> > > - Add dummy regulator to example, because the pwm-backlight binding requires a
> > >   power supply
> > >
> > >
> > > For reference, here is the binding in text form:
> > >
> > >
> > >   PWM functionality in Netronix Embedded Controller
> > >
> > >   Required properties:
> > >   - compatible: should be "netronix,ntxec-pwm"
> > >   - #pwm-cells: should be 2.
> > >
> > >   Available PWM channels:
> > >   - 0: The PWM channel controlled by registers 0xa1-0xa7
> > >
> > >   Example:
> > >
> > >     embedded-controller at 43 {
> > >             compatible = "netronix,ntxec";
> > >             ...
> > >
> > >             ec_pwm: pwm {
> > >                     compatible = "netronix,ntxec-pwm";
> > >                     #pwm-cells = <1>;
> > >             };
> > >     };
> > >
> > >     ...
> > >
> > >     backlight {
> > >             compatible = "pwm-backlight";
> > >             pwms = <&ec_pwm 0 50000>;
> > >     };
> > > ---
> > >  .../bindings/mfd/netronix,ntxec.yaml          | 19 +++++++++++
> > >  .../bindings/pwm/netronix,ntxec-pwm.yaml      | 33 +++++++++++++++++++
> > >  2 files changed, 52 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > > index 596df460f98eb..73c873dda3e70 100644
> > > --- a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > > +++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > > @@ -31,6 +31,9 @@ properties:
> > >      description:
> > >        The EC can signal interrupts via a GPIO line
> > >
> > > +  pwm:
> > > +    $ref: ../pwm/netronix,ntxec-pwm.yaml
> > > +
> > >  required:
> > >    - compatible
> > >    - reg
> > > @@ -53,5 +56,21 @@ examples:
> > >                      interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> > >                      interrupt-controller;
> > >                      #interrupt-cells = <1>;
> > > +
> > > +                    ec_pwm: pwm {
> > > +                            compatible = "netronix,ntxec-pwm";
> > > +                            #pwm-cells = <2>;
> > > +                    };
> > >              };
> > >      };
> > > +
> > > +    backlight {
> > > +            compatible = "pwm-backlight";
> > > +            pwms = <&ec_pwm 0 50000>;
> > > +            power-supply = <&backlight_regulator>;
> > > +    };
> > > +
> > > +    backlight_regulator: regulator-dummy {
> > > +            compatible = "regulator-fixed";
> > > +            regulator-name = "backlight";
> > > +    };
> > > diff --git a/Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml b/Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml
> > > new file mode 100644
> > > index 0000000000000..0c9d2801b8de1
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml
> > > @@ -0,0 +1,33 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/pwm/netronix,ntxec-pwm.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: PWM functionality in Netronix embedded controller
> > > +
> > > +maintainers:
> > > +  - Jonathan Neuschäfer <j.neuschaefer at gmx.net>
> > > +
> > > +description: |
> > > +  See also Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > > +
> > > +  The Netronix EC contains PWM functionality, which is usually used to drive
> > > +  the backlight LED.
> > > +
> > > +  The following PWM channels are supported:
> > > +    - 0: The PWM channel controlled by registers 0xa1-0xa7
> > > +
> > > +allOf:
> > > +  - $ref: pwm.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: netronix,ntxec-pwm
> > > +
> > > +  "#pwm-cells":
> > > +    const: 2
> >
> > Just move this to the parent and make the parent a pwm provider. There's
> > no need for child nodes for this or the rtc.
> >
> hmm, there are apparently devices without rtc. If there is a child node
> for the rtc, the corresponding devicetrees could disable rtc by not
> having that node.
> But maybe using the controller version is also feasible for that task.

If not probeable, then the compatible string should distinguish that.

Rob