[PATCH v2 04/10] dt-bindings: pwm: Add bindings for PWM function in Netronix EC

[Andreas Kemnade]

Hi,

On Mon, 14 Sep 2020 18:54:43 -0600
Rob Herring <robh at kernel.org> wrote:

> On Sat, Sep 05, 2020 at 03:32:24PM +0200, Jonathan Neuschäfer wrote:
> > The Netronix embedded controller as found in Kobo Aura and Tolino Shine
> > supports one PWM channel, which is used to control the frontlight
> > brightness on these devices.
> > 
> > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
> > ---
> > 
> > v2:
> > - Add plaintext binding to patch description, for comparison
> > - Fix pwm-cells property (should be 2, not 1)
> > - Add dummy regulator to example, because the pwm-backlight binding requires a
> >   power supply
> > 
> > 
> > For reference, here is the binding in text form:
> > 
> > 
> >   PWM functionality in Netronix Embedded Controller
> > 
> >   Required properties:
> >   - compatible: should be "netronix,ntxec-pwm"
> >   - #pwm-cells: should be 2.
> > 
> >   Available PWM channels:
> >   - 0: The PWM channel controlled by registers 0xa1-0xa7
> > 
> >   Example:
> > 
> >   	embedded-controller at 43 {
> >   		compatible = "netronix,ntxec";
> >   		...
> > 
> >   		ec_pwm: pwm {
> >   			compatible = "netronix,ntxec-pwm";
> >   			#pwm-cells = <1>;
> >   		};
> >   	};
> > 
> >   	...
> > 
> >   	backlight {
> >   		compatible = "pwm-backlight";
> >   		pwms = <&ec_pwm 0 50000>;
> >   	};
> > ---
> >  .../bindings/mfd/netronix,ntxec.yaml          | 19 +++++++++++
> >  .../bindings/pwm/netronix,ntxec-pwm.yaml      | 33 +++++++++++++++++++
> >  2 files changed, 52 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > index 596df460f98eb..73c873dda3e70 100644
> > --- a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > +++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > @@ -31,6 +31,9 @@ properties:
> >      description:
> >        The EC can signal interrupts via a GPIO line
> > 
> > +  pwm:
> > +    $ref: ../pwm/netronix,ntxec-pwm.yaml
> > +
> >  required:
> >    - compatible
> >    - reg
> > @@ -53,5 +56,21 @@ examples:
> >                      interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> >                      interrupt-controller;
> >                      #interrupt-cells = <1>;
> > +
> > +                    ec_pwm: pwm {
> > +                            compatible = "netronix,ntxec-pwm";
> > +                            #pwm-cells = <2>;
> > +                    };
> >              };
> >      };
> > +
> > +    backlight {
> > +            compatible = "pwm-backlight";
> > +            pwms = <&ec_pwm 0 50000>;
> > +            power-supply = <&backlight_regulator>;
> > +    };
> > +
> > +    backlight_regulator: regulator-dummy {
> > +            compatible = "regulator-fixed";
> > +            regulator-name = "backlight";
> > +    };
> > diff --git a/Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml b/Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml
> > new file mode 100644
> > index 0000000000000..0c9d2801b8de1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pwm/netronix,ntxec-pwm.yaml
> > @@ -0,0 +1,33 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pwm/netronix,ntxec-pwm.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: PWM functionality in Netronix embedded controller
> > +
> > +maintainers:
> > +  - Jonathan Neuschäfer <j.neuschaefer at gmx.net>
> > +
> > +description: |
> > +  See also Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
> > +
> > +  The Netronix EC contains PWM functionality, which is usually used to drive
> > +  the backlight LED.
> > +
> > +  The following PWM channels are supported:
> > +    - 0: The PWM channel controlled by registers 0xa1-0xa7
> > +
> > +allOf:
> > +  - $ref: pwm.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: netronix,ntxec-pwm
> > +
> > +  "#pwm-cells":
> > +    const: 2  
> 
> Just move this to the parent and make the parent a pwm provider. There's 
> no need for child nodes for this or the rtc.
> 
hmm, there are apparently devices without rtc. If there is a child node
for the rtc, the corresponding devicetrees could disable rtc by not
having that node.
But maybe using the controller version is also feasible for that task.

Regards,
Andreas