[PATCH v4 1/5] arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs
Lokesh Vutla
lokeshvutla at ti.com
Mon Sep 14 12:22:27 EDT 2020
To allow lesser dependency and better maintainability use CONFIG_ARCH_K3
for building dtbs for all K3 based devices. This is as per the
discussion in [0].
[0] https://lore.kernel.org/linux-arm-kernel/20200908112534.t5bgrjf7y3a6l2ss@akan/
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 05c0bebf65d4..7f28be62b8da 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -3,9 +3,9 @@
# Make file to build device tree binaries for boards based on
# Texas Instruments Inc processors
#
-# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+# Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
#
-dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
-dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
--
2.28.0
More information about the linux-arm-kernel
mailing list