[PATCH v3 0/5] arm64: Initial support for Texas Instrument's J7200 Platform

Lokesh Vutla lokeshvutla at ti.com
Tue Sep 8 12:22:47 EDT 2020


This series adds initial support for latest new SoC, J7200, from Texas Instruments.

The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded products.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

This series is based on the ti-k3-dts-next from Nishanth's tree[0].
Boot log: https://pastebin.ubuntu.com/p/Ppng92TR9z/

Changes since v2:
- Update Makefile to build dtbs using CONFIG_ARCH_K3
- use 0x00 in all places just to be consistent for all K3 devices
- Fixed upper case to lower case in reg property.

[0] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git

Lokesh Vutla (5):
  arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs
  dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema
  dt-bindings: arm: ti: Add bindings for J7200 SoC
  arm64: dts: ti: Add support for J7200 SoC
  arm64: dts: ti: Add support for J7200 Common Processor Board

 .../devicetree/bindings/arm/ti/k3.txt         |  26 ---
 .../devicetree/bindings/arm/ti/k3.yaml        |  35 +++
 MAINTAINERS                                   |   2 +-
 arch/arm64/boot/dts/ti/Makefile               |   6 +-
 .../dts/ti/k3-j7200-common-proc-board.dts     |  64 ++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 199 ++++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |  84 ++++++++
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   |  29 +++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          | 165 +++++++++++++++
 9 files changed, 581 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt
 create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi

-- 
2.28.0




More information about the linux-arm-kernel mailing list