[PATCH] ARM: dts: vfxxx: Add node for CAAM

[Shawn Guo]

On Sat, Jul 04, 2020 at 06:40:43PM -0700, Chris Healy wrote:
> Add node for CAAM device in NXP Vybrid SoC.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> Signed-off-by: Chris Healy <cphealy at gmail.com>
> ---
>  arch/arm/boot/dts/vfxxx.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 2d547e7b21ad..0fe03aa0367f 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -729,6 +729,28 @@
>                  dma-names = "rx","tx";
>                  status = "disabled";
>              };
> +
> +            crypto: crypto at 400f0000 {
> +                compatible = "fsl,sec-v4.0";

Please use tab for indentation.

Shawn

> +                #address-cells = <1>;
> +                #size-cells = <1>;
> +                reg = <0x400f0000 0x9000>;
> +                ranges = <0 0x400f0000 0x9000>;
> +                clocks = <&clks VF610_CLK_CAAM>;
> +                clock-names = "ipg";
> +
> +                sec_jr0: jr0 at 1000 {
> +                    compatible = "fsl,sec-v4.0-job-ring";
> +                    reg = <0x1000 0x1000>;
> +                    interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
> +                };
> +
> +                sec_jr1: jr1 at 2000 {
> +                    compatible = "fsl,sec-v4.0-job-ring";
> +                    reg = <0x2000 0x1000>;
> +                    interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
> +                };
> +            };
>          };
>      };
>  };
> --
> 2.21.3