[PATCH] ARM: dts: vfxxx: Add node for CAAM

[Chris Healy]

Add node for CAAM device in NXP Vybrid SoC.

Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
Signed-off-by: Chris Healy <cphealy at gmail.com>
---
 arch/arm/boot/dts/vfxxx.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2d547e7b21ad..0fe03aa0367f 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -729,6 +729,28 @@
                 dma-names = "rx","tx";
                 status = "disabled";
             };
+
+            crypto: crypto at 400f0000 {
+                compatible = "fsl,sec-v4.0";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                reg = <0x400f0000 0x9000>;
+                ranges = <0 0x400f0000 0x9000>;
+                clocks = <&clks VF610_CLK_CAAM>;
+                clock-names = "ipg";
+
+                sec_jr0: jr0 at 1000 {
+                    compatible = "fsl,sec-v4.0-job-ring";
+                    reg = <0x1000 0x1000>;
+                    interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+                };
+
+                sec_jr1: jr1 at 2000 {
+                    compatible = "fsl,sec-v4.0-job-ring";
+                    reg = <0x2000 0x1000>;
+                    interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+                };
+            };
         };
     };
 };
--
2.21.3