[PATCH v2] wpa_supplicant: Add a configuration file for the P2P_DEVICE parameters

Peer, Ilan ilan.peer
Wed Oct 23 07:31:30 PDT 2013


Hi Jouni,

Did you get a chance to look at this patch? 

Thanks in advance,

Ilan.

-----Original Message-----
From: Peer, Ilan 
Sent: Monday, September 02, 2013 15:41
To: hostap at lists.shmoo.com
Cc: Peer, Ilan
Subject: [PATCH v2] wpa_supplicant: Add a configuration file for the P2P_DEVICE parameters

Add an option to specify a configuration file that can be used to hold the P2P_DEVICE configuration parameters. If this option is not used, the P2P_DEVICE configuration parameters will be read from interface configuration file.

Note that it is advised to use this option in some cases such as:

1. If a P2P_DEVICE is supported by the driver, the wpa_supplicant creates
   a dedicated P2P Device interface, where the configuration file used for
   the main interface is used. As a consequence, if the configuration file
   includes network definition etc., the wpa_supplicant will try to perform
   station specific flows on the P2P Device interface which will fail.
2. If a P2P_DEVICE is supported by the driver and update_config is used,
   the P2P Device configuration data will override the main interface
   configuration data.

Signed-hostap: Ilan Peer <ilan.peer at intel.com>
---
 wpa_supplicant/README             |    3 ++-
 wpa_supplicant/main.c             |   13 ++++++++++++-
 wpa_supplicant/p2p_supplicant.c   |   15 ++++++++++++++-
 wpa_supplicant/wpa_supplicant.c   |   10 ++++++++++
 wpa_supplicant/wpa_supplicant_i.h |   16 ++++++++++++++++
 5 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/wpa_supplicant/README b/wpa_supplicant/README index 78df89e..c215845 100644
--- a/wpa_supplicant/README
+++ b/wpa_supplicant/README
@@ -413,7 +413,7 @@ usage:
         [-G<group>] \
         -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] [-p<driver_param>] \
         [-b<br_ifname> [-N -i<ifname> -c<conf> [-C<ctrl>] [-D<driver>] \
-        [-p<driver_param>] [-b<br_ifname>] ...]
+        [-p<driver_param>] [-b<br_ifname>] [-m<p2p Device config file>] ...
 
 options:
   -b = optional bridge interface name
@@ -438,6 +438,7 @@ options:
   -w = wait for interface to be added, if needed
   -W = wait for a control interface monitor before starting
   -N = start describing new interface
+  -m = Configuration file for the P2P Device
 
 drivers:
   nl80211 = Linux nl80211/cfg80211
diff --git a/wpa_supplicant/main.c b/wpa_supplicant/main.c index 39b837e..430b68b 100644
--- a/wpa_supplicant/main.c
+++ b/wpa_supplicant/main.c
@@ -35,6 +35,9 @@ static void usage(void)
 	       "        [-N -i<ifname> -c<conf> [-C<ctrl>] "
 	       "[-D<driver>] \\\n"
 	       "        [-p<driver_param>] [-b<br_ifname>] [-I<config file>] "
+#ifdef CONFIG_P2P
+	       "        [-m<P2P Device config file>] "
+#endif
 	       "...]\n"
 	       "\n"
 	       "drivers:\n",
@@ -83,6 +86,9 @@ static void usage(void)  #endif /* CONFIG_DBUS */
 	printf("  -v = show version\n"
 	       "  -W = wait for a control interface monitor before starting\n"
+#ifdef CONFIG_P2P
+	       "  -m = Configuration file for the P2P Device interface\n"
+#endif /* CONFIG_P2P */
 	       "  -N = start describing new interface\n");
 
 	printf("example:\n"
@@ -160,7 +166,7 @@ int main(int argc, char *argv[])
 
 	for (;;) {
 		c = getopt(argc, argv,
-			   "b:Bc:C:D:de:f:g:G:hi:I:KLNo:O:p:P:qsTtuvW");
+			   "b:Bc:C:D:de:f:g:G:hi:I:KLNo:O:p:P:qsTtuvWm:");
 		if (c < 0)
 			break;
 		switch (c) {
@@ -213,6 +219,11 @@ int main(int argc, char *argv[])
 		case 'I':
 			iface->confanother = optarg;
 			break;
+#ifdef CONFIG_P2P
+		case 'm':
+			iface->conf_p2p_dev = optarg;
+			break;
+#endif /* CONFIG_P2P */
 		case 'K':
 			params.wpa_debug_show_keys++;
 			break;
diff --git a/wpa_supplicant/p2p_supplicant.c b/wpa_supplicant/p2p_supplicant.c index c0e8651..c19109d 100644
--- a/wpa_supplicant/p2p_supplicant.c
+++ b/wpa_supplicant/p2p_supplicant.c
@@ -3145,7 +3145,20 @@ int wpas_p2p_add_p2pdev_interface(struct wpa_supplicant *wpa_s)
 	iface.ifname = wpa_s->pending_interface_name;
 	iface.driver = wpa_s->driver->name;
 	iface.driver_param = wpa_s->conf->driver_param;
-	iface.confname = wpa_s->confname;
+
+	/*
+	 * If a P2P Device configuration file was given, use it as the interface
+	 * configuration file (instead of using parent's configuration file.
+	 */
+	if (wpa_s->conf_p2p_dev) {
+		iface.confname = wpa_s->conf_p2p_dev;
+		iface.ctrl_interface = NULL;
+	} else {
+		iface.confname = wpa_s->confname;
+		iface.ctrl_interface = wpa_s->conf->ctrl_interface;
+	}
+	iface.conf_p2p_dev = NULL;
+
 	p2pdev_wpa_s = wpa_supplicant_add_iface(wpa_s->global, &iface);
 	if (!p2pdev_wpa_s) {
 		wpa_printf(MSG_DEBUG, "P2P: Failed to add P2P Device interface"); diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c index c274f3c..f388098 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -404,6 +404,11 @@ static void wpa_supplicant_cleanup(struct wpa_supplicant *wpa_s)
 	os_free(wpa_s->confanother);
 	wpa_s->confanother = NULL;
 
+#ifdef CONFIG_P2P
+	os_free(wpa_s->conf_p2p_dev);
+	wpa_s->conf_p2p_dev = NULL;
+#endif /* CONFIG_P2P */
+
 	wpa_sm_set_eapol(wpa_s->wpa, NULL);
 	eapol_sm_deinit(wpa_s->eapol);
 	wpa_s->eapol = NULL;
@@ -2826,6 +2831,11 @@ static int wpa_supplicant_init_iface(struct wpa_supplicant *wpa_s,
 		wpa_s->confanother = os_rel2abs_path(iface->confanother);
 		wpa_config_read(wpa_s->confanother, wpa_s->conf);
 
+#ifdef CONFIG_P2P
+		wpa_s->conf_p2p_dev = os_rel2abs_path(iface->conf_p2p_dev);
+		wpa_config_read(wpa_s->conf_p2p_dev, wpa_s->conf); #endif /* 
+CONFIG_P2P */
+
 		/*
 		 * Override ctrl_interface and driver_param if set on command
 		 * line.
diff --git a/wpa_supplicant/wpa_supplicant_i.h b/wpa_supplicant/wpa_supplicant_i.h
index d69cd61..f7b21c9 100644
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
@@ -63,6 +63,17 @@ struct wpa_interface {
 	 */
 	const char *confanother;
 
+#ifdef CONFIG_P2P
+	/**
+	 * conf_p2p_dev - Additional configuration file used to hold the
+	 * P2P Device configuration parameters.
+	 *
+	 * This can also be %NULL. In such a case, if a P2P Device dedicated
+	 * interfaces is created, the main configuration file will be used.
+	 */
+	const char *conf_p2p_dev;
+#endif /* CONFIG_P2P */
+
 	/**
 	 * ctrl_interface - Control interface parameter
 	 *
@@ -334,6 +345,11 @@ struct wpa_supplicant {
 
 	char *confname;
 	char *confanother;
+
+#ifdef CONFIG_P2P
+	char *conf_p2p_dev;
+#endif /* CONFIG_P2P */
+
 	struct wpa_config *conf;
 	int countermeasures;
 	os_time_t last_michael_mic_error;
--
1.7.10.4




More information about the Hostap mailing list