hostapd with Atheros

[Michael Plourde]

Ok,
still answer to myself, wlan* modules were not all loaded !
But when i try :
insmod wlan
insmod wlan_acl
insmod wlan_wep
insmod wlan_tkip
insmod wlan_ccmp

got this error:

insmod: unresolved symbol crypto_alloc_tfm
insmod: unresolved symbol crypto_free_tfm

i know that's mean that a module is missing (not loaded) but wich one...

Someone knows ?

----- Original Message ----- 
From: "Michael Plourde" <mplourde at digicom.ca>
To: "Michael Plourde" <mplourde at digicom.ca>; <HostAP at shmoo.com>
Sent: Tuesday, February 21, 2006 3:37 PM
Subject: Re: hostapd with Atheros


> ok,
> i had forget to put
> driver=madwifi
> line in the .conf file.
> But now i have this error:
> --------------------------------------------------------------------------
--
> -
>  hostapd -dd /etc/hostapd/hostapd.conf
> Configuration file: /etc/hostapd/hostapd.conf
> madwifi_set_iface_flags: dev_up=0
> Using interface ath0 with hwaddr xx:xx:xx:xx:xx:xx and ssid 'xxxxx'
> Flushing old station entries
> madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3
> ioctl[unknown???]: Operation not supported
> Could not connect to kernel driver.
> Deauthenticate all stations
> rmdir[ctrl_interface]: No such file or directory
> madwifi_set_privacy: enabled=0
> madwifi_set_iface_flags: dev_up=0
> --------------------------------------------------------------------------
--
> -
> Any idea ,
>
> Thank you,
>
> Michael Plourde
>
>
> ----- Original Message ----- 
> From: "Michael Plourde" <mplourde at digicom.ca>
> To: <HostAP at shmoo.com>
> Sent: Tuesday, February 21, 2006 3:19 PM
> Subject: hostapd with Atheros
>
>
> >
> >  Hi,
> > i have try to compile hostapd for use with my Atheros card. My .config
> file
> > looks like:
>
> --------------------------------------------------------------------------
> -
> > # Driver interface for Host AP driver
> > CONFIG_DRIVER_HOSTAP=y
> >
> > # Driver interface for wired authenticator
> > #CONFIG_DRIVER_WIRED=y
> >
> > # Driver interface for madwifi driver
> > CONFIG_DRIVER_MADWIFI=y
> > CFLAGS += -I/home/mplourde/Developpement/madwifi-ng-r1352-20051211
> > # change to reflect local setup; directory for madwifi src
> >
> > # Driver interface for Prism54 driver
> > #CONFIG_DRIVER_PRISM54=y
> >
> > # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
> > #CONFIG_DRIVER_BSD=y
> > CFLAGS += -I/usr/local/wrap-board/include
> > LIBS += -L/usr/local/wrap-board/usr/lib
> >
> > # IEEE 802.11F/IAPP
> > CONFIG_IAPP=y
> >
> >
> > # WPA2/IEEE 802.11i RSN pre-authentication
> > CONFIG_RSN_PREAUTH=y
> >
> > # Integrated EAP server
> > CONFIG_EAP=y
> >
> > # EAP-MD5 for the integrated EAP server
> > CONFIG_EAP_MD5=y
> >
> > # EAP-TLS for the integrated EAP server
> > CONFIG_EAP_TLS=y
> >
> > # EAP-MSCHAPv2 for the integrated EAP server
> > CONFIG_EAP_MSCHAPV2=y
> >
> > # EAP-PEAP for the integrated EAP server
> > CONFIG_EAP_PEAP=y
> >
> > # EAP-GTC for the integrated EAP server
> > CONFIG_EAP_GTC=y
> >
> > # EAP-TTLS for the integrated EAP server
> > CONFIG_EAP_TTLS=y
> >
> > # EAP-SIM for the integrated EAP server
> > #CONFIG_EAP_SIM=y
> >
> > # EAP-PAX for the integrated EAP server
> > #CONFIG_EAP_PAX=y
> >
> > # EAP-PSK for the integrated EAP server (this is _not_ needed for
WPA-PSK)
> > #CONFIG_EAP_PSK=y
> >
> > # PKCS#12 (PFX) support (used to read private key and certificate file
> from
> > # a file that usually has extension .p12 or .pfx)
> > CONFIG_PKCS12=y
> >
> > # RADIUS authentication server. This provides access to the integrated
EAP
> > # server from external hosts using RADIUS.
> > #CONFIG_RADIUS_SERVER=y
> >
> > # Build IPv6 support for RADIUS operations
> > CONFIG_IPV6=y
> >
>
> --------------------------------------------------------------------------
> --
> > ----
> >
> > i had no problem with compilation, but when trying to run hostapd :
>
> --------------------------------------------------------------------------
> --
> > ----
> >  hostapd -dd /etc/hostapd/hostapd.conf
> > Configuration file: /etc/hostapd/hostapd.conf
> > ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
> > Could not enable hostapd mode for interface ath0
> > hostap driver initialization failed.
>
> --------------------------------------------------------------------------
> --
> > ----
> > What is wrong ?
> >
> > Thank you,
> > Michael Plourde
> >
> >
> >
> >
> > _______________________________________________
> > HostAP mailing list
> > HostAP at shmoo.com
> > http://lists.shmoo.com/mailman/listinfo/hostap
> >
>
>