which firmware for wl200?

wlan.20.briony at spamgourmet.com wlan.20.briony
Sat May 21 10:13:24 PDT 2005


Hello all!

I've been looking for firmware for my compaq wl200 in this list but what
i found makes me suspicious - there's a firmware posted by pedro
estrela:
http://lists.shmoo.com/pipermail/hostap/2002-October/000050.html
and he recommends it again later
http://lists.shmoo.com/pipermail/hostap/2002-December/000856.html

but when i try to update my card with it i get:

Incompatible interfaces:
  SREC: role=Actor    variant=1 range=1-1 iface=Modem-Firmware (1)
  card: role=Supplier variant=0 range=1-1 iface=Modem-Firmware (1)
Incompatible update data.

unfortunately i don't really understand what this error message
means(resp. what variant=0/1 means) and if its harmfull, i'm afraid something could break if i force it.

i get the same results with S1010409.HEX mentioned in the second thread
above. should i try to force the upload with -if? and with which firmware?
i guess the newest firmware that supports my card is around version
1.4.9 - does the firmware have a lot of influence on security issues
like alternating wep-keys and authentification with radius? i've searched a while and was happy
to find an old prism-card and don't want to buy a senao for 60 Euros,
hope it will work with the 10 Euro "Elektronikschrott" i bought on ebay ;-)

any input/recommendations are appreciated!

here are my
card-specs:

Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8002 v1.0.1 (HWB3163-01,02,03,04 Rev A)
PRIID: id=0x0015 v0.3.0
STAID: id=0x001f v0.6.2 (station firmware)

Production Data Area (PDA)

PDR 0x0001 len=8 Platform name / Manufacturing part number
   41 30 30 30 30 30 30 30
PDR 0x0007 len=8 MAC Controller Supplier Range
   02 00 01 00 01 00 01 00
PDR 0x0008 len=8 NIC ID (component ID)
   02 80 01 00 01 00 00 00
PDR 0x0101 len=6 MAC Address
   00 50 8b 46 bd bb
PDR 0x0103 len=12 Regulatory Domain List
   02 00 30 00 00 00 00 00 00 00 00 00
PDR 0x0104 len=2 Allowed Channel Set/Active Channel List
   ff 1f
PDR 0x0105 len=2 Default Channel
   03 00
PDR 0x0107 len=2 Temperature Type
   01 00
PDR 0x0202 len=100 3861 Baseline Register Settings
   9b 16 00 02 48 04 48 06 80 08 03 0a 00 0c 00 0e 60 10 a2 12 bc 14 1b
16 00 18 00 1a 00 1c 5c 1e 82 20 20 22 c4 24 17 26 0a 28 0e 2a 20 2c 0c
2e 2d 30 20 32 90 34 18 36 76 38 0a$PDR 0x0203 len=128 3861 Shadow
Register Settings
   00 2c 0c 2e 01 2c 10 2e 02 2c 14 2e 03 2c 18 2e 04 2c 1c 2e 05 2c 20
2e 06 2c 24 2e 07 2c 28 2e 08 2c 2e 2e 09 2c 34 2e 0a 2c 38 2e 0b 2c 3c
2e 0c 2c 3f 2e 0d 2c 43 2e 0e 2c 46$PDR 0x0000 len=2 PDA End Record
   9c 31

best regards
tom




More information about the Hostap mailing list