Madwifi along with WPA-PSK

[Nigel Cunningham]

Hi.

I only know about using it under pure Linux, I'm afraid. Can't help you
with a windows client.

Regards,

Nigel

On Tue, 2005-02-01 at 12:04, joseph_chen wrote:
> at first , than you for your response!
> I just wonder whether I have to use wpa_supplicant to be the supplicant.
> if the  supplicant is windows client, is it still OK about WPA-PSK? 
> 
> 
> Joseph
> 
> ----- Original Message ----- 
> From: "Nigel Cunningham" <ncunningham at linuxmail.org>
> To: "joseph_chen" <chenifang at giga.net.tw>
> Cc: <hostap at shmoo.com>
> Sent: Tuesday, February 01, 2005 5:40 AM
> Subject: Re: Madwifi along with WPA-PSK
> 
> 
> > Hi.
> > 
> > Yes. You need to get the wpa_supplicant, but it is possible:
> > 
> > /sbin/ifconfig ath0 up
> > /sbin/iwconfig ath0 channel 1
> > /usr/bin/wpa_supplicant -c/etc/wpa_supplicant.conf -Dmadwifi -iath0 -B
> > 
> > Does it for me (with the appropriate things in the conf). I had less
> > success trying with channel != 1.
> > 
> > Netgear WG511T talking to DLink604T.
> > 
> > Regards,
> > 
> > Nigel
> > 
> > On Mon, 2005-01-31 at 20:54, joseph_chen wrote:
> > > Hi ~ hotstapd guy
> > >  
> > > Has anyone successfully test Madwifi with hostapd to act an as
> > > authenticator ? Is WPA-PSK workable ?
> > >  
> > >  
> > > Joseph
> > >  
> > >  
> > > 
> > > ______________________________________________________________________
> > > _______________________________________________
> > > HostAP mailing list
> > > HostAP at shmoo.com
> > > http://lists.shmoo.com/mailman/listinfo/hostap
> > -- 
> > Nigel Cunningham
> > Software Engineer, Canberra, Australia
> > http://www.cyclades.com
> > 
> > Ph: +61 (2) 6292 8028      Mob: +61 (417) 100 574
> > 
-- 
Nigel Cunningham
Software Engineer, Canberra, Australia
http://www.cyclades.com

Ph: +61 (2) 6292 8028      Mob: +61 (417) 100 574