wpa_supplicant linux NL-2511CD PLUS EXT2
Paulo Jorge
mls-misc
Mon Jan 31 13:16:27 PST 2005
Hi,
I'm trying to get wpa_supplicant 0.3.6 to work on linux 2.6.10 kernel.
I'm using hostap driver and it works well.
However I try to use wpa_supplicant in debug mode (wpa_supplicant -c
wpa_supplicant.conf -iwlan0 -d) I get this errors:
Initializing interface 'wlan0' conf 'wpa_supplicant.conf' driver
'default' Configuration file 'wpa_supplicant.conf' ->
'/home/pjorge/bin/WPA/new/wpa_supplicant.conf' Reading configuration
file'/home/pjorge/bin/WPA/new/wpa_supplicant.conf' Priority group 0
id=0 ssid='qqcoisa'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
socket(PF_PACKET, SOCK_RAW): Operation not permitted
wpa_driver_hostap_set_wpa: enabled=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not permitted
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not permitted
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not permitted
Failed to disable WPA in the driver.
wpa_driver_hostap_set_drop_unencrypted: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not permitted
wpa_driver_hostap_set_countermeasures: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not permitted
If I do a: "iwpriv wlan0" I get this:
wlan0 Available private ioctl :
monitor (8BE4) : set 1 int & get 0
readmif (8BE3) : set 1 byte & get 1 byte
writemif (8BE2) : set 2 byte & get 0
reset (8BE6) : set 1 int & get 0
inquire (8BE8) : set 1 int & get 0
set_rid_word (8BEE) : set 2 int & get 0
maccmd (8BF0) : set 1 int & get 0
wds_add (8BEA) : set 1 addr & get 0
wds_del (8BEC) : set 1 addr & get 0
addmac (8BF2) : set 1 addr & get 0
delmac (8BF4) : set 1 addr & get 0
kickmac (8BF6) : set 1 addr & get 0
prism2_param (8BE0) : set 2 int & get 0
getprism2_param (8BE1) : set 1 int & get 1 int
txratectrl (0002) : set 1 int & get 0
gettxratectrl (0002) : set 0 & get 1 int
beacon_int (0003) : set 1 int & get 0
getbeacon_int (0003) : set 0 & get 1 int
pseudo_ibss (0004) : set 1 int & get 0
getpseudo_ibss (0004) : set 0 & get 1 int
alc (0005) : set 1 int & get 0
getalc (0005) : set 0 & get 1 int
dump (0007) : set 1 int & get 0
getdump (0007) : set 0 & get 1 int
other_ap_policy (0008) : set 1 int & get 0
getother_ap_pol (0008) : set 0 & get 1 int
max_inactivity (0009) : set 1 int & get 0
getmax_inactivi (0009) : set 0 & get 1 int
bridge_packets (000A) : set 1 int & get 0
getbridge_packe (000A) : set 0 & get 1 int
dtim_period (000B) : set 1 int & get 0
getdtim_period (000B) : set 0 & get 1 int
nullfunc_ack (000C) : set 1 int & get 0
getnullfunc_ack (000C) : set 0 & get 1 int
max_wds (000D) : set 1 int & get 0
getmax_wds (000D) : set 0 & get 1 int
autom_ap_wds (000E) : set 1 int & get 0
getautom_ap_wds (000E) : set 0 & get 1 int
ap_auth_algs (000F) : set 1 int & get 0
getap_auth_algs (000F) : set 0 & get 1 int
allow_fcserr (0010) : set 1 int & get 0
getallow_fcserr (0010) : set 0 & get 1 int
host_encrypt (0011) : set 1 int & get 0
gethost_encrypt (0011) : set 0 & get 1 int
host_decrypt (0012) : set 1 int & get 0
gethost_decrypt (0012) : set 0 & get 1 int
busmaster_rx (0013) : set 1 int & get 0
getbusmaster_rx (0013) : set 0 & get 1 int
busmaster_tx (0014) : set 1 int & get 0
getbusmaster_tx (0014) : set 0 & get 1 int
host_roaming (0015) : set 1 int & get 0
gethost_roaming (0015) : set 0 & get 1 int
bcrx_sta_key (0016) : set 1 int & get 0
getbcrx_sta_key (0016) : set 0 & get 1 int
ieee_802_1x (0017) : set 1 int & get 0
getieee_802_1x (0017) : set 0 & get 1 int
antsel_tx (0018) : set 1 int & get 0
getantsel_tx (0018) : set 0 & get 1 int
antsel_rx (0019) : set 1 int & get 0
getantsel_rx (0019) : set 0 & get 1 int
monitor_type (001A) : set 1 int & get 0
getmonitor_type (001A) : set 0 & get 1 int
wds_type (001B) : set 1 int & get 0
getwds_type (001B) : set 0 & get 1 int
hostscan (001C) : set 1 int & get 0
gethostscan (001C) : set 0 & get 1 int
ap_scan (001D) : set 1 int & get 0
getap_scan (001D) : set 0 & get 1 int
enh_sec (001E) : set 1 int & get 0
getenh_sec (001E) : set 0 & get 1 int
basic_rates (0020) : set 1 int & get 0
getbasic_rates (0020) : set 0 & get 1 int
oper_rates (0021) : set 1 int & get 0
getoper_rates (0021) : set 0 & get 1 int
hostapd (0022) : set 1 int & get 0
gethostapd (0022) : set 0 & get 1 int
hostapd_sta (0023) : set 1 int & get 0
gethostapd_sta (0023) : set 0 & get 1 int
wpa (0024) : set 1 int & get 0
getwpa (0024) : set 0 & get 1 int
privacy_invoked (0025) : set 1 int & get 0
getprivacy_invo (0025) : set 0 & get 1 int
tkip_countermea (0026) : set 1 int & get 0
gettkip_counter (0026) : set 0 & get 1 int
drop_unencrypte (0027) : set 1 int & get 0
getdrop_unencry (0027) : set 0 & get 1 int
Any help?
Thanks in advance.
Best regards,
Paulo Jorge
More information about the Hostap
mailing list