Help configuring i.MX6 IPUv3 with a parrallel display

[Philippe Leduc]

Same result with memset or cp : the screen stay white. I'll recheck my
timings. Could it be related with the freeze of the splash utility?

BTW, it seems that of_get_display_timings() can't manage ranges of
datas as mentionned in the binding doc (display-timings.txt).
Philippe LEDUC
ledphilippe at gmail.com


2016-02-24 13:43 GMT+01:00 Sascha Hauer <s.hauer at pengutronix.de>:
> On Wed, Feb 24, 2016 at 01:39:25PM +0100, Philippe Leduc wrote:
>> > You could try setting it to
>> V4L2_PIX_FMT_RGB24 manually in ipu_crtc_mode_set().
>> It is working with this trick and I do not get any error:
>>
>> Unfortunately, the display stay white... I tried to write it with "mw
>> -d /dev/fb0 0xXXXXXXXX +0x40000" and splash freeze the board.
>
> Try 'cp /dev/ram0 /dev/fb0' or 'memset -d /dev/fb0 0x0 0x55 1M'. With
> 'mw' you can only write single words which only gives you some dots in
> one screen corner.
>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |