boards: phytec-som-am335x: ethernet broken after reset

[Michael Grzeschik]

Hi Teresa,

With the current code for the phytec-som-am335x, the ethernet works only
after the first powerup. If you soft reset the module the network won't
work anymore.

...
cpsw 4a100000.ethernet: detected phy mask 0x6
mdio_bus: miibus0: probed
cpsw 4a100000.ethernet: Failed to setup slave 0: I/O error
...

That happens in the second boot. The phy is probably in a wrong state and
won't communicate over MDIO.

Do you have any ideas?

Thanks,
Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |