QCN9274 - x64 - AMD or Intel

[Jeff Johnson]

On 4/10/2024 7:52 AM, david Atkins wrote:
> 
> I just built the ath-next branch for my AMD Ryzen 3 4300U system with an 8devices QCN9274 module, it appears to have a new message 
> 
> memory type 10 not supported
> 
> in the dmesg logs
> 
> [    2.705656] ath12k_pci 0000:03:00.0: BAR 0 [mem 0xfe200000-0xfe3fffff 64bit]: assigned
> [    2.705672] ath12k_pci 0000:03:00.0: enabling device (0000 -> 0002)
> [    2.705885] ath12k_pci 0000:03:00.0: MSI vectors: 16
> [    2.705889] ath12k_pci 0000:03:00.0: Hardware name: qcn9274 hw2.0
> [    3.405328] ath12k_pci 0000:03:00.0: memory type 10 not supported
> [    3.410796] ath12k_pci 0000:03:00.0: chip_id 0x0 chip_family 0xb board_id 0xc soc_id 0x401a2200
> [    3.410804] ath12k_pci 0000:03:00.0: fw_version 0x1011001d fw_build_timestamp 2022-12-02 01:16 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> [    3.431347] ath12k_pci 0000:03:00.0: failed to fetch board data for bus=pci,qmi-chip-id=0,qmi-board-id=12 from ath12k/QCN9274/hw2.0/board-2.bin
> [    3.431375] ath12k_pci 0000:03:00.0: failed to fetch board.bin from QCN9274/hw2.0
> [    3.431386] ath12k_pci 0000:03:00.0: qmi failed to load bdf:
> [    3.431387] ath12k_pci 0000:03:00.0: qmi failed to load board data file:-2
> 
> I'll try on my other test bed systems, but is it expected that this will get further than this ?

I believe the memory type 10 message can be ignored (I've received conflicting information on that)

You need to get the board file in place. Please grab the one at:
https://git.codelinaro.org/clo/ath-firmware/ath12k-firmware/-/blob/main/QCN9274/hw2.0/board-2.bin

And place it in <firmware>/ath12k/QCN9274/hw2.0/