QCN9274 - x64 - AMD or Intel

[david Atkins]

I just built the ath-next branch for my AMD Ryzen 3 4300U system with an 8devices QCN9274 module, it appears to have a new message 

memory type 10 not supported

in the dmesg logs

[    2.705656] ath12k_pci 0000:03:00.0: BAR 0 [mem 0xfe200000-0xfe3fffff 64bit]: assigned
[    2.705672] ath12k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    2.705885] ath12k_pci 0000:03:00.0: MSI vectors: 16
[    2.705889] ath12k_pci 0000:03:00.0: Hardware name: qcn9274 hw2.0
[    3.405328] ath12k_pci 0000:03:00.0: memory type 10 not supported
[    3.410796] ath12k_pci 0000:03:00.0: chip_id 0x0 chip_family 0xb board_id 0xc soc_id 0x401a2200
[    3.410804] ath12k_pci 0000:03:00.0: fw_version 0x1011001d fw_build_timestamp 2022-12-02 01:16 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
[    3.431347] ath12k_pci 0000:03:00.0: failed to fetch board data for bus=pci,qmi-chip-id=0,qmi-board-id=12 from ath12k/QCN9274/hw2.0/board-2.bin
[    3.431375] ath12k_pci 0000:03:00.0: failed to fetch board.bin from QCN9274/hw2.0
[    3.431386] ath12k_pci 0000:03:00.0: qmi failed to load bdf:
[    3.431387] ath12k_pci 0000:03:00.0: qmi failed to load board data file:-2

I'll try on my other test bed systems, but is it expected that this will get further than this ?

System uname -a

Linux openwrt-wifi-test 6.9.0-rc1+ #3 SMP PREEMPT_DYNAMIC Mon Apr  8 07:47:14 BST 2024 x86_64 x86_64 x86_64 GNU/Linux

David


David Atkins