ath10k-firmware: QCA9888 hw2.0: Add Linksys WHW03V2 specific BDFs

[Kalle Valo]

Vincent Tremblay <vincent at vtremblay.dev> writes:

> This is a set of files for the Linksys WHW03V2 that are currently
> missing from the repository.
>
> *  description for what hardware this is:
>
>   - it is a IPQ4019 based board
>   - QCA9888 V2 interface connected over PCI-E to operate on higher
> part of the 5 GHZ spectrum
>
> * origin of the board file (did you create it yourself or where you
>   downloaded):
>
>   They were extracted from the vendor firmware (version 2.1.19.209783).
>   The files can be found in the folder "/lib/firmware/QCA9888/v2/FCC".
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k):
>
> bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin
> md5sum: fde89e0dace1652566d96fb9c83b1c61
>
> * attach the actual board file (board.bin):
>
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

It looks like you submitted a new version of this so dropping this one.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches