ath10k-firmware: QCA4019 hw1.0: Add Linksys WHW03V2 specific BDFs

[Kalle Valo]

Vincent Tremblay <vincent at vtremblay.dev> writes:

> This is a set of files for the Linksys WHW03V2 that are currently
> missing from the repository.
>
> *  description for what hardware this is:
>
>   - it is a IPQ4019 based board
>   - one QCA40xx radio is used as 2.4GHz radio
>   - one QCA40xx radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you
>   downloaded):
>
>   They were extracted from the vendor firmware (version 2.1.19.209783).
>   The files can be found in the folder "/lib/firmware/IPQ4019/v2/FCC".
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k):
>
> bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-whw03v2.bin
> md5sum: 0435269fbb0797bf269b8cb0591e7544
>
> bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-whw03v2.bin
> md5sum: 79042d093e81a43c8c790bc124ca4dfc
>
> * attach the actual board file (board.bin):
>
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

It looks like you submitted a new version of these so dropping this one.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches