ath10k-firmware: QCA4019 hw1.0: Add Pakedge WR-1 BDFs

[Kalle Valo]

Tomasz Maciej Nowak <tmn505 at gmail.com> writes:

> I didn't see previously any request for adding multiply files for single radio,
> if that's frowned upon, please include only the ones without certification
> institution suffix (-ACMA, -IC, -SRRC). Thanks.
>
> Description for what hardware this is:
> Pakedge WR-1 is a Dual band wireless router.
> Design based on IPQ40xx/AP-DK01.1-C1
> - one QCA40xx radio is used as 2.4GHz radio
> - one QCA40xx radio is used as 5GHz radio
>
> Origin of the board file (did you create it yourself or where you downloaded):
> Files were copied from flash chip of mentioned device, originally called:
>
> boardData_1_0_IPQ4019_Y9803_wifi0-2017-07-20-d941e23712b3596dee0c1042a20d3702.bin
> boardData_1_0_IPQ4019_Y9803_wifi0_ACMA-2017-10-13-64d8ede4af92a45245c7e7af4f32462d.bin
> boardData_1_0_IPQ4019_Y9803_wifi0_IC-2017-07-28-d941e23712b3596dee0c1042a20d3702.bin
> (same as the 1st)
> boardData_1_0_IPQ4019_Y9803_wifi0_SRRC-2018-01-15-bdb871aa33722d14cf33410208cc40d1.bin
>
> boardData_1_0_IPQ4019_Y9803_wifi1-2017-08-02-9e36c74546614062b84f6868325de42b.bin
> boardData_1_0_IPQ4019_Y9803_wifi1_ACMA-2017-10-13-f214e782e0e2e82e15a4a7381ced2a29.bin
> boardData_1_0_IPQ4019_Y9803_wifi1_IC-2017-08-03-b89f97ba74cdb1fdd6127ccf6064815.bin
> boardData_1_0_IPQ4019_Y9803_wifi1_SRRC-2018-01-15-87cfd46bba373fb33cb9d603bc871a0c.bin
>
> Ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k):
> QCA4019 hw1.0
>
>   bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=Pakedge-WR-1
>   md5sum: d941e23712b3596dee0c1042a20d3702
>   sha256sum: b01ddf3807cd5cd9ec3c5d4c018ff2fa6377e60e1207187a59119018710d8372
>
>   bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=Pakedge-WR-1-ACMA
>   md5sum: 64d8ede4af92a45245c7e7af4f32462d
>   sha256sum: bde478a8295e9b14d5fb89acfc75a1a4fd73aa3cc81a6f6ad49a9c492fcdf507
>
>   bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=Pakedge-WR-1-SRRC
>   md5sum: bdb871aa33722d14cf33410208cc40d1
>   sha256sum: 0a0e3f670b8c29c68128ad1ea4fd707e9276c4c16b0aa5f8ea6427fcce14dbe3
>
>
>   bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1
>   md5sum: 9e36c74546614062b84f6868325de42b
>   sha256sum: ef6a5a3d2a37f3619463df37e5c0cdbe8a023a85067d30e45780afbe8b706d47
>
>   bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1-ACMA
>   md5sum: f214e782e0e2e82e15a4a7381ced2a29
>   sha256sum: d934dbf0d48a13f9192bb7e41c4a888de8ba4a2d5c8a7b66078d330035ed9828
>
>   bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1-IC
>   md5sum: bb89f97ba74cdb1fdd6127ccf6064815
>   sha256sum: 5404f616b3b1816fec7a1ecc9c5ef7fd32f1a0bc85db62972c60c30db1de13da
>
>   bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1-SRRC
>   md5sum: 87cfd46bba373fb33cb9d603bc871a0c
>   sha256sum: 6b55eab79070d331e0c5d0d54074f4e4cbc1455b6a662e085a965cc613e0e996
>
> The attached files have names derived from ids to be used with .bin file extension.

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=Pakedge-WR-1
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=Pakedge-WR-1-ACMA
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=Pakedge-WR-1-SRRC
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1-ACMA
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1-IC
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=Pakedge-WR-1-SRRC

Changed:


Deleted:

7 board image(s) added, 0 changed, 0 deleted, 124 in total

https://github.com/kvalo/ath10k-firmware/commit/7dff998ec61163b90a8a6d389b7c9120c7dbec7b


-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches