ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF
Kalle Valo
kvalo at kernel.org
Fri Mar 17 04:38:29 PDT 2023
Giammarco Marzano <giammarco.marzano at gmail.com> writes:
> this file is for add definition for ZTE MF289F.
>
> The device is currently under review as PR on OpenWRT:
> https://github.com/openwrt/openwrt/pull/10418
>
> Please ignore my email of 3 August, this board binary add support for
> 5Ghz on AT2 version with correct calibration data.
>
> * description for what hardware this is:
>
> - it is a IPQ4019 based board
> - one QCA4019 radio is used as 2.4GHz radio
> - one QCA4019 radio is used as 5Ghz radio in AT2 revision
> - one QCA9984 radio is used as 5GHz radio in AT1 revision
>
> * origin of the board file: taken from stock firmware image
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
> - QCA4019 hw1.0
>
> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f
> md5sum: 175139f44d2ae01c2b23e093d571e962
> + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f
> md5sum: 175139f44d2ae01c2b23e093d571e962
>
>
> * attach the actual board file (board.bin)
>
> - The name of the file is equal to the first id string in the board-2.bin
> (minus the ".bin")
Note: There was only board file attached but the text listed two.
Thanks, added to QCA4019/hw1.0/board-2.bin:
New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 117 in total
https://github.com/kvalo/ath10k-firmware/commit/5ff99d697bc686a3b77d7644b61aadfa3b1c5c3f
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
More information about the ath10k
mailing list