[PATCH 1/2] ath10k: add support for MSDU IDs for USB devices

[Kalle Valo]

Erik Stromdahl <erik.stromdahl at gmail.com> writes:

> On 3/28/22 07:28, Kalle Valo wrote:
>> Erik Stromdahl <erik.stromdahl at gmail.com> writes:
>>
>>> commit 93bbdec6683e1c8ba2cc4e6 ("ath10k: htt: support MSDU ids with
>>> SDIO") introduced MSDU ID allocation in the htt TX path for high latency
>>> devices. This feature needs to be enabled for USB as well in order to
>>> have a functional TX path.
>>>
>>> Signed-off-by: Erik Stromdahl <erik.stromdahl at gmail.com>
>>
>> On what hardware and firmware version did you test these patches? I'll
>> then add the Tested-on tag:
>>
>> https://wireless.wiki.kernel.org/en/users/drivers/ath10k/submittingpatches#tested-on_tag
>>
>
> Hardware: Linksys WUSB6100M
> Fw version: QCA9377 hw1.0 USB 1.0.0.299
>
> Above fw version is printed by the driver at startup:
>
> ath10k_log_dbg: usb 1-3 firmware 1.0.0.299 booted

Thanks, I added this:

Tested-on: QCA9377 hw1.0 USB 1.0.0.299

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches