ath10k-firmware: QCA4019 hw1.0: Add ZTE MF286D specific BDFs

[Kalle Valo]

Paweł Dembicki <paweldembicki at gmail.com> writes:

> I am preparing OpenWrt support for the ZTE MF286D router. It's based
> on the IPQ4019 processor.
>
> * description of hardware
>   - QCA4019-based board
>   - QCA4019 is used as 2.4 GHz radio
>   - QCA4019 is used as 5 GHz radio
>
> * origin of the board file
>   - Pulled from the stock firmware dump.
>
> * IDs to be used with the board file
>   - bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf286d
>     md5sum: 489f0157df7d92857a8d915098c2de56
>   - bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf286d
>     md5sum: e0fd5376d24f0c2c3c49ba2a7fc37376
>
> Board file is attached.

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf286d
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf286d

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 89 in total

https://github.com/kvalo/ath10k-firmware/commit/93591ce918f3d7b1070efcc90e08308b85f22b3e


-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches