ath10k-firmware: QCA4019 hw1.0: Add ZTE MF286D specific BDFs

[Paweł Dembicki]

I am preparing OpenWrt support for the ZTE MF286D router. It's based
on the IPQ4019 processor.

* description of hardware
  - QCA4019-based board
  - QCA4019 is used as 2.4 GHz radio
  - QCA4019 is used as 5 GHz radio

* origin of the board file
  - Pulled from the stock firmware dump.

* IDs to be used with the board file
  - bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf286d
    md5sum: 489f0157df7d92857a8d915098c2de56
  - bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf286d
    md5sum: e0fd5376d24f0c2c3c49ba2a7fc37376

Board file is attached.

-- 
Best Regards,
Pawel Dembicki
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf286d.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20220118/654e4529/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf286d.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20220118/654e4529/attachment-0003.bin>