[v2] ath10k-firmware: QCA4019 hw1.0: Add Cell C RTL30VW specific BDF

[Kalle Valo]

Paweł Dembicki <paweldembicki at gmail.com> writes:

> Hi,
>
> Currently this device is in the process of being added to OpenWRT
> (https://github.com/openwrt/openwrt/pull/2841).
>
> To answer the questions on the wiki page:
>
> * description for what hardware this is:
>
>   - it is a QCA401x based board (AP-DK01.1-C2 based)
>   - one QCA40xx radio is used as 2.4GHz radio
>   - one QCA40xx radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you  downloaded)
>
>   - Extracted from factory firmware
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
>   - QCA4019 hw1.0
>
> BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=cellc,rtl30vw'
> BoardMD5: 54f78d6348ebdd1857ba3d42407bd7e4
>
> BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=cellc,rtl30vw'
> BoardMD5: 396013851bb5c28c67f60f08ca3675b5
>
> NOTE:
>
> "bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=cellc,rtl30vw" file
> have the same md5 sum as
> "bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=AVM-FRITZBox-4040".
>
> In first message i sent  one bin without duplicate but Christian
> Lamparter on OpenWrt github ask me for resend with both bin files.
>
> * attach the actual board file (board.bin)

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=cellc,rtl30vw

Changed:


Deleted:

1 board image(s) added, 0 changed, 0 deleted, 74 in total

https://github.com/kvalo/ath10k-firmware/commit/a633c15d93519f1b0f85e05fc3988e7104e85ac1

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches