ath10k-firmware: QCA4019 hw1.0: Add Aruba AP-303 specific BDFs

[Kalle Valo]

David Bauer <mail at david-bauer.net> writes:

> this is a set of board.bin files for the Aruba AP-303,
> which I wish to be added to the ath10k-firmware repository.
>
> As per the current "Submitting board files" guidelines [1]:
>
> * description for what hardware this is:
>   - it is a IPQ4029 based board
>     - one QCA40xx radio is used as 2.4 GHz radio
>     - one QCA40xx radio is used as 5 GHz radio
>
> * origin of the board file (did you create it yourself or where you
>   downloaded)
>   - all files were extracted from official vendor firmware which was on
> the device
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>   - qca4019 hw1.0
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Aruba-AP-303
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Aruba-AP-303
> * sha256sum of each new board file to add
>   - bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Aruba-AP-303.bin
>     - deeeee5b1408681c68699d068eea297aa970a64fef4f04ad4fc30413e186d67f
>   - bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Aruba-AP-303.bin
>     - b636eb18ed7c2df6a6f2567009bf95c7c2252feea146b4f05d8757514fe1d6e1
>
> * attach the actual board file (board.bin)
>   - the name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Aruba-AP-303
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Aruba-AP-303

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 73 in total

https://github.com/kvalo/ath10k-firmware/commit/46a4f4a7165fc0ed51abfa70fb3713791c394026

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches