ath10k-firmware: QCA4019 hw1.0: Add ZTE MF289F rev. AT1/AT2 (2.4G/5.8G) specific BDF

[Giammarco Marzano]

Hi,

this file is for add definition for ZTE MF289F.

The device is currently under review as PR on OpenWRT:
https://github.com/openwrt/openwrt/pull/10418

Please ignore my email of 3 August, this board binary add support for
5Ghz on AT2 version with correct calibration data.

* description for what hardware this is:

  - it is a IPQ4019 based board
  - one QCA4019 radio is used as 2.4GHz radio
  - one QCA4019 radio is used as 5Ghz radio in AT2 revision
  - one QCA9984 radio is used as 5GHz radio in AT1 revision

* origin of the board file: taken from stock firmware image

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)

  - QCA4019 hw1.0

    + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f
      md5sum: 175139f44d2ae01c2b23e093d571e962
    + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f
      md5sum: 175139f44d2ae01c2b23e093d571e962


* attach the actual board file (board.bin)

  - The name of the file is equal to the first id string in the board-2.bin
    (minus the ".bin")

Kind regards,
Giammarco
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f.bin
Type: application/macbinary
Size: 24308 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20220817/39db36e3/attachment-0001.bin>