[PATCH 3/3] ath10k: Support ethtool gstats2 API.

[kbuild test robot]

Hi Ben,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on mac80211/master]
[also build test ERROR on v4.17-rc1 next-20180419]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/greearb-candelatech-com/ethtool-Support-ETHTOOL_GSTATS2-command/20180419-105301
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git master
config: x86_64-randconfig-ne0-04191514 (attached as .config)
compiler: gcc-6 (Debian 6.4.0-9) 6.4.0 20171026
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> drivers/net/wireless/ath/ath10k/mac.c:7706:21: error: 'ath10k_debug_get_et_stats2' undeclared here (not in a function)
     .get_et_stats2   = ath10k_debug_get_et_stats2,
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~

vim +/ath10k_debug_get_et_stats2 +7706 drivers/net/wireless/ath/ath10k/mac.c

  7672	
  7673	static const struct ieee80211_ops ath10k_ops = {
  7674		.tx				= ath10k_mac_op_tx,
  7675		.wake_tx_queue			= ath10k_mac_op_wake_tx_queue,
  7676		.start				= ath10k_start,
  7677		.stop				= ath10k_stop,
  7678		.config				= ath10k_config,
  7679		.add_interface			= ath10k_add_interface,
  7680		.remove_interface		= ath10k_remove_interface,
  7681		.configure_filter		= ath10k_configure_filter,
  7682		.bss_info_changed		= ath10k_bss_info_changed,
  7683		.set_coverage_class		= ath10k_mac_op_set_coverage_class,
  7684		.hw_scan			= ath10k_hw_scan,
  7685		.cancel_hw_scan			= ath10k_cancel_hw_scan,
  7686		.set_key			= ath10k_set_key,
  7687		.set_default_unicast_key        = ath10k_set_default_unicast_key,
  7688		.sta_state			= ath10k_sta_state,
  7689		.conf_tx			= ath10k_conf_tx,
  7690		.remain_on_channel		= ath10k_remain_on_channel,
  7691		.cancel_remain_on_channel	= ath10k_cancel_remain_on_channel,
  7692		.set_rts_threshold		= ath10k_set_rts_threshold,
  7693		.set_frag_threshold		= ath10k_mac_op_set_frag_threshold,
  7694		.flush				= ath10k_flush,
  7695		.tx_last_beacon			= ath10k_tx_last_beacon,
  7696		.set_antenna			= ath10k_set_antenna,
  7697		.get_antenna			= ath10k_get_antenna,
  7698		.reconfig_complete		= ath10k_reconfig_complete,
  7699		.get_survey			= ath10k_get_survey,
  7700		.set_bitrate_mask		= ath10k_mac_op_set_bitrate_mask,
  7701		.sta_rc_update			= ath10k_sta_rc_update,
  7702		.offset_tsf			= ath10k_offset_tsf,
  7703		.ampdu_action			= ath10k_ampdu_action,
  7704		.get_et_sset_count		= ath10k_debug_get_et_sset_count,
  7705		.get_et_stats			= ath10k_debug_get_et_stats,
> 7706		.get_et_stats2			= ath10k_debug_get_et_stats2,
  7707		.get_et_strings			= ath10k_debug_get_et_strings,
  7708		.add_chanctx			= ath10k_mac_op_add_chanctx,
  7709		.remove_chanctx			= ath10k_mac_op_remove_chanctx,
  7710		.change_chanctx			= ath10k_mac_op_change_chanctx,
  7711		.assign_vif_chanctx		= ath10k_mac_op_assign_vif_chanctx,
  7712		.unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx,
  7713		.switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx,
  7714		.sta_pre_rcu_remove		= ath10k_mac_op_sta_pre_rcu_remove,
  7715		.sta_statistics			= ath10k_sta_statistics,
  7716	
  7717		CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
  7718	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 30420 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20180419/83ace105/attachment-0001.gz>