ath10k-firmware: QCA4019 hw1.0/QCA9888 hw2.0: Add OpenMesh A62 specific BDFs

[Kalle Valo]

Sven Eckelmann <sven.eckelmann at openmesh.com> writes:

> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
>   - QCA4019 hw1.0
>
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
>       sha256sum:
>       df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
>       sha256sum:
>       96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88
>
>   - QCA9888 hw2.0
>
>     + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
>       sha256sum:
>       c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa

BTW, in the future md5sum would be more useful as ath10k-bdencoder
--info prints that. I added that to the wiki as well:

https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles

-- 
Kalle Valo