[PATCH] ath10k:Prevent setting wrong key idx for station

[SenthilKumar Jegadeesan]

On Wed, Jan 28, 2015 at 10:23:35AM +0200, Kalle Valo wrote:
> <senthilb at qti.qualcomm.com> writes:
> 
> > From: SenthilKumar Jegadeesan <sjegadee at qti.qualcomm.com>
> >
> > Ath10k driver sets wrong default key idx that results in
> > sending unicast frames with multicast key.
> >
> > The reason for this behavior is that cached broadcast key
> > is installed for station MAC address on association. After
> > dot1x completes, unicast key is installed for station
> > MAC address. Default key idx is set to broadcast key id when
> > driver tries to send broadcast frame. This causes firmware
> > to use broadcast key id to transmit unicast frames to stations.
> >
> > Used TX_USAGE flag to set default key for stations.
> >
> > Added callback for setting unicast default idx which will be
> > invoked on every default key idx configuration.
> >
> > Signed-off-by: SenthilKumar Jegadeesan <sjegadee at qti.qualcomm.com>
> 
> I had a trivial conflict in ath10k_add_interface(), please double check
> my conflict resolution in the pending branch:
> 
> https://github.com/kvalo/ath/commit/34e5197d250d7be04bba5ad2b2d33cd9a7c41b0f
> 
> And in the future please also CC linux-wireless when submitting ath10k
> patches.
>
Kalle, 

Confilcts aren't resolved properly. I will re-send the patch from top of the
branch. 

Thanks,
SenthilJ