[PATCH 2/9] ath10k: remove unused pdev_set_channel command

[Michal Kazior]

This command is not used anymore and most firmware
revisions do not seem to handle it well. Channel
switching is done via vdev restarting.

Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 36 -----------------------------------
 drivers/net/wireless/ath/ath10k/wmi.h |  7 -------
 2 files changed, 43 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 772cca5..89e63d5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2871,42 +2871,6 @@ int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
 							 ctl2g, ctl5g);
 }
 
-int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
-				const struct wmi_channel_arg *arg)
-{
-	struct wmi_set_channel_cmd *cmd;
-	struct sk_buff *skb;
-	u32 ch_flags = 0;
-
-	if (arg->passive)
-		return -EINVAL;
-
-	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
-	if (!skb)
-		return -ENOMEM;
-
-	if (arg->chan_radar)
-		ch_flags |= WMI_CHAN_FLAG_DFS;
-
-	cmd = (struct wmi_set_channel_cmd *)skb->data;
-	cmd->chan.mhz               = __cpu_to_le32(arg->freq);
-	cmd->chan.band_center_freq1 = __cpu_to_le32(arg->freq);
-	cmd->chan.mode              = arg->mode;
-	cmd->chan.flags		   |= __cpu_to_le32(ch_flags);
-	cmd->chan.min_power         = arg->min_power;
-	cmd->chan.max_power         = arg->max_power;
-	cmd->chan.reg_power         = arg->max_reg_power;
-	cmd->chan.reg_classid       = arg->reg_class_id;
-	cmd->chan.antenna_max       = arg->max_antenna_gain;
-
-	ath10k_dbg(ar, ATH10K_DBG_WMI,
-		   "wmi set channel mode %d freq %d\n",
-		   arg->mode, arg->freq);
-
-	return ath10k_wmi_cmd_send(ar, skb,
-				   ar->wmi.cmd->pdev_set_channel_cmdid);
-}
-
 int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt)
 {
 	struct wmi_pdev_suspend_cmd *cmd;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 86f5ebc..b8098d2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2908,11 +2908,6 @@ enum wmi_tp_scale {
 	WMI_TP_SCALE_SIZE   = 5,	/* max num of enum     */
 };
 
-struct wmi_set_channel_cmd {
-	/* channel (only frequency and mode info are used) */
-	struct wmi_channel chan;
-} __packed;
-
 struct wmi_pdev_chanlist_update_event {
 	/* number of channels */
 	__le32 num_chan;
@@ -4732,8 +4727,6 @@ int ath10k_wmi_connect(struct ath10k *ar);
 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
 
-int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
-				const struct wmi_channel_arg *);
 int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt);
 int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
 int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
-- 
1.8.5.3