Running throughput tests

[Ben Greear]

On 03/30/2014 12:31 AM, Bart Jooris wrote:
> Dear Ben,
>
> On 03/29/2014 09:18 PM, Ben Greear wrote:
>> On 03/29/2014 12:42 PM, Bart Jooris wrote:
>>
>>> -DSS-1300 with i5-2540M CPU @ 2.60GHz - 8GB RAM - SSD 64GB.
>>> -1 sparkLAN WPEA-351AC card with QCA9880 chip set and 3 dual band antenna's.
>>> -Kernel 3.13.5 containing the ath10k modules
>>> -firmwares cloned end of February
>>> -iperf in udp mode used for the  throughput test
>>
>> I get 500+Mbps on some other NICs with same chipset...
> :-) Which cards are you using?

I get same general throughput with CUS223 and WLE900VX.

>> I'll get some
>> WPEA-351AC as soon as I can find someone willing to sell them and will
>> do some tests on those as well...
>>
> I have 8 of those, I can lend you 2.

I'll contact you off list about this.

Thanks,
Ben

>> With very latest ath10k tree and firmware, you can cat out the
>> debug stats and see your station tx/rx train rates..that might
>> be interesting information...
> I will give it another try to compile the latest ath10k.
>
> Thanks,
>
> Bart
>


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com