Running throughput tests

[Bart Jooris]

Dear Ben,

On 03/29/2014 09:18 PM, Ben Greear wrote:
> On 03/29/2014 12:42 PM, Bart Jooris wrote:
>
>> -DSS-1300 with i5-2540M CPU @ 2.60GHz - 8GB RAM - SSD 64GB.
>> -1 sparkLAN WPEA-351AC card with QCA9880 chip set and 3 dual band 
>> antenna's.
>> -Kernel 3.13.5 containing the ath10k modules
>> -firmwares cloned end of February
>> -iperf in udp mode used for the  throughput test
>
> I get 500+Mbps on some other NICs with same chipset... 
:-) Which cards are you using?
> I'll get some
> WPEA-351AC as soon as I can find someone willing to sell them and will
> do some tests on those as well...
>
I have 8 of those, I can lend you 2.
> With very latest ath10k tree and firmware, you can cat out the
> debug stats and see your station tx/rx train rates..that might
> be interesting information...
I will give it another try to compile the latest ath10k.

Thanks,

Bart

-- 
Bart Jooris
Department of Information Technology
Internet Based Communication Networks and Services (IBCN)
Ghent University - iMinds
Gaston Crommenlaan 8 (Bus 201), B-9050 Gent, Belgium
E-mail: bart.jooris at intec.UGent.be
M: +32 474 59 53 42
Tel. +32 9 33 14900
Fax +32 9 33 14899