compat-wireless-2014-05-22 breaks ath10k in an Archer C7 v2

Michal Kazior michal.kazior at
Sun Jun 8 22:07:29 PDT 2014

On 7 June 2014 08:11, Sven Schnelle <svens at> wrote:
> Hi Kalle,
> Am 07.06.2014 07:36, schrieb Kalle Valo:
>> Kamal Koshy <kamal.koshy at> writes:
>>> Attaching the result of dd if=/dev/mtd4 > ~/mtd4
>> Thanks, I'll take a look at that later. But before that, do you know
>> what's the mac address of the QCA9880 device with the proprietary
>> driver? (_not_ with ath10k) That would help searching for the
>> calibration data.
> To me it looks like ath9k calibration data starts at 0x1000, and ath10k
> calibration data
> starts at 0x5000 in that mtd image. That's the same as on my board.

The data looks very similar to board.bin (2116 bytes and familiar hex
patterns). Can anyone replacing using it as the


More information about the ath10k mailing list