[PATCH] ath10k: AP: handle HT station which does not have HT RX MCS

Kalle Valo kvalo at qca.qualcomm.com
Thu Feb 13 10:46:53 EST 2014


Bartosz Markowski <bartosz.markowski at tieto.com> writes:

> On 11 February 2014 09:06, Kalle Valo <kvalo at qca.qualcomm.com> wrote:
>> Bartosz Markowski <bartosz.markowski at tieto.com> writes:
>>
>>> This is a workaround for HT-enabled STAs which break the spec
>>> and have no HT capabilities RX mask (no HT RX MCS map).
>>>
>>> As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
>>> MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
>>>
>>> Firmware asserts if such situation occurs.
>>>
>>> Signed-off-by: Bartosz Markowski <bartosz.markowski at tieto.com>
>>
>> This conflicted with Marek K's patch "ath10k: Set proper nss value for
>> the peer". Please check that my resolution in ath-next-test is correct:
>>
>> https://github.com/kvalo/ath/commit/d56aa0e779c17f8048a70a9dbd5228b54d9a712e
>
> Looks good.

Thanks, applied.

-- 
Kalle Valo



More information about the ath10k mailing list