[PATCH] ath10k: AP: handle HT station which does not have HT RX MCS

[Bartosz Markowski]

On 11 February 2014 09:06, Kalle Valo <kvalo at qca.qualcomm.com> wrote:
> Bartosz Markowski <bartosz.markowski at tieto.com> writes:
>
>> This is a workaround for HT-enabled STAs which break the spec
>> and have no HT capabilities RX mask (no HT RX MCS map).
>>
>> As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
>> MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
>>
>> Firmware asserts if such situation occurs.
>>
>> Signed-off-by: Bartosz Markowski <bartosz.markowski at tieto.com>
>
> This conflicted with Marek K's patch "ath10k: Set proper nss value for
> the peer". Please check that my resolution in ath-next-test is correct:
>
> https://github.com/kvalo/ath/commit/d56aa0e779c17f8048a70a9dbd5228b54d9a712e

Looks good.

-- 
Bartosz