[wireless-regdb] wireless-regdb: Update regulatory rules for Brazil (BR)
Cesar Eduardo Barros
cesarb at cesarb.eti.br
Wed Aug 17 17:07:27 PDT 2022
Em 17/08/2022 20:31, Cesar Eduardo Barros escreveu:
> For range 5925-7125 MHz (article 11.7), there are different rules for
> APs, clients, and very low power devices. For APs (article 11.7.1), the
> maximum EIRP is 30 dBm (article 11.7.1.1), and it's INDOOR-ONLY (article
> 11.7.1.3); for clients of an indoor AP (article 11.7.2), the maximum
> EIRP is 24 dBm (article 11.7.2.1), and it's INDOOR-ONLY (article
> 11.7.2.3); for very low power devices (article 11.7.3), the maximum EIRP
> is 17 dBm (article 11.7.3.1).
Thinking better about it, I might have miscalculated this one. Since the
smallest channel we use is 20 MHz, and the EIRP power density for
clients is limited to -1 dBm/MHz (article 11.7.2.2), if I'm doing the
calculations correctly the limit for clients would be 12 dBm, that is,
(5925 - 7125 @ 320), (12), NO-OUTDOOR
It's unfortunate that we cannot represent that kind of rule in db.txt,
and are forced to artificially limit the power by 12 dB (the full power
of 24 dBm I had calculated would work only for 320 MHz).
I would appreciate if you could look over these power density rules,
especially the ones which are in dBm/MHz instead of mW/MHz, since I
might have miscalculated something else.
--
Cesar Eduardo Barros
cesarb at cesarb.eti.br
More information about the wireless-regdb
mailing list