[PATCH 2/3] wifi: wcn36xx: Do not enforce interrupt trigger type

Loic Poulain loic.poulain at oss.qualcomm.com
Wed Nov 18 12:20:59 PST 2026


On Wed, Nov 18, 2026 at 3:58 PM Alexandre Rapaille via B4 Relay
<devnull+arapaille.atlr-engineering.com at kernel.org> wrote:
>
> From: Alexandre Rapaille <arapaille at atlr-engineering.com>
>
> Forcing IRQF_TRIGGER_HIGH over the DT type makes the re-probe after a WCNSS
> restart fail ("type mismatch, failed to map hwirq"). Rely on the DT, as
> commit 1ee6c5abebd3 ("ath10k: do not enforce interrupt trigger type") did.

Can you explain why it fails? Is the fix at the right layer here?

>
> Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
> Signed-off-by: Alexandre Rapaille <arapaille at atlr-engineering.com>
> ---
>  drivers/net/wireless/ath/wcn36xx/dxe.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
> index 801f1218ef..7852f71368 100644
> --- a/drivers/net/wireless/ath/wcn36xx/dxe.c
> +++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
> @@ -552,14 +552,14 @@ static int wcn36xx_dxe_request_irqs(struct wcn36xx *wcn)
>  {
>         int ret;
>
> -       ret = request_irq(wcn->tx_irq, wcn36xx_irq_tx_complete,
> -                         IRQF_TRIGGER_HIGH, "wcn36xx_tx", wcn);
> +       ret = request_irq(wcn->tx_irq, wcn36xx_irq_tx_complete, 0,
> +                         "wcn36xx_tx", wcn);
>         if (ret) {
>                 wcn36xx_err("failed to alloc tx irq\n");
>                 goto out_err;
>         }
>
> -       ret = request_irq(wcn->rx_irq, wcn36xx_irq_rx_ready, IRQF_TRIGGER_HIGH,
> +       ret = request_irq(wcn->rx_irq, wcn36xx_irq_rx_ready, 0,
>                           "wcn36xx_rx", wcn);
>         if (ret) {
>                 wcn36xx_err("failed to alloc rx irq\n");
>
> --
> 2.43.0
>
>



More information about the wcn36xx mailing list