[PATCH 2/3] wifi: wcn36xx: Do not enforce interrupt trigger type

Luca Weiss luca.weiss at fairphone.com
Wed Nov 18 08:13:20 PST 2026


On Wed Nov 18, 2026 at 3:58 PM CET, Alexandre Rapaille via B4 Relay wrote:
> From: Alexandre Rapaille <arapaille at atlr-engineering.com>
>
> Forcing IRQF_TRIGGER_HIGH over the DT type makes the re-probe after a WCNSS
> restart fail ("type mismatch, failed to map hwirq"). Rely on the DT, as
> commit 1ee6c5abebd3 ("ath10k: do not enforce interrupt trigger type") did.

Worth noting, that all upstream dts files that use qcom,wcnss-wlan
(apart from msm8974.dtsi which is getting updated in this series) are
already using IRQ_TYPE_LEVEL_HIGH, so this should not change behavior
for any other SoC.

>
> Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
> Signed-off-by: Alexandre Rapaille <arapaille at atlr-engineering.com>
> ---
>  drivers/net/wireless/ath/wcn36xx/dxe.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
> index 801f1218ef..7852f71368 100644
> --- a/drivers/net/wireless/ath/wcn36xx/dxe.c
> +++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
> @@ -552,14 +552,14 @@ static int wcn36xx_dxe_request_irqs(struct wcn36xx *wcn)
>  {
>  	int ret;
>  
> -	ret = request_irq(wcn->tx_irq, wcn36xx_irq_tx_complete,
> -			  IRQF_TRIGGER_HIGH, "wcn36xx_tx", wcn);
> +	ret = request_irq(wcn->tx_irq, wcn36xx_irq_tx_complete, 0,
> +			  "wcn36xx_tx", wcn);
>  	if (ret) {
>  		wcn36xx_err("failed to alloc tx irq\n");
>  		goto out_err;
>  	}
>  
> -	ret = request_irq(wcn->rx_irq, wcn36xx_irq_rx_ready, IRQF_TRIGGER_HIGH,
> +	ret = request_irq(wcn->rx_irq, wcn36xx_irq_rx_ready, 0,
>  			  "wcn36xx_rx", wcn);
>  	if (ret) {
>  		wcn36xx_err("failed to alloc rx irq\n");





More information about the wcn36xx mailing list