[PATCH 4/5] wcn3620: use new response format for wcn3620 trigger_ba

[Yin, Fengwei]

From: Andy Green <andy.green at linaro.org>

From: Andy Green <andy.green at linaro.org>

On wcn3620, firmware response to trigger_ba uses the new, larger
"v2" format

Signed-off-by: Andy Green <andy.green at linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index a84c2cc..f2443a0 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -1968,7 +1968,8 @@ int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index)
 		wcn36xx_err("Sending hal_trigger_ba failed\n");
 		goto out;
 	}
-	ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len);
+	ret = wcn36xx_smd_rsp_status_check_v2(wcn, wcn->hal_buf,
+						wcn->hal_rsp_len);
 	if (ret) {
 		wcn36xx_err("hal_trigger_ba response failed err=%d\n", ret);
 		goto out;
-- 
2.1.4