BD and HT Aggregation

[Eugene Krasnikov]

The only method i know is to dump HAL path on prima and compare it to
wcn36xx. Good luck!

On Wed, Oct 16, 2013 at 7:52 PM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
> my assumption for bullet number 2 is that bss index is wrong, but that
> is just a speculation:) Let me know if you find something.
>
> On Wed, Oct 16, 2013 at 7:44 PM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>> I would suggest to concentrate on bullet 2 first. Second bullet is
>> much easier to fix!
>>
>> On Wed, Oct 16, 2013 at 7:41 PM, Chun-Yeow Yeoh
>> <yeohchunyeow at cozybit.com> wrote:
>>>> 1) When you say "The only different, I saw from prima"  you mean you
>>>> saw in source code? Try to run prima driver and dump BD and then
>>>> compare wcn36xx and prima logs.
>>> Yes, referring source code. Ok I try this first.
>>>
>>> ----
>>> Chun-Yeow
>>>
>>> On Wed, Oct 16, 2013 at 11:38 AM, Eugene Krasnikov <k.eugene.e at gmail.com> wrote:
>>>> 1) When you say "The only different, I saw from prima"  you mean you
>>>> saw in source code? Try to run prima driver and dump BD and then
>>>> compare wcn36xx and prima logs.
>>>> 2) If STA mode fails then there is a regression! I would suggest first
>>>> to fix this problem and then come back to bullet number 1.
>>>>
>>>> On Wed, Oct 16, 2013 at 7:28 PM, Chun-Yeow Yeoh
>>>> <yeohchunyeow at cozybit.com> wrote:
>>>>>> 1) Try it first;) i am confident that TX agg should work with prim
>>>>> The only different, I saw from prima is that the writing of DXE
>>>>> register, like marking the EOP and INT. But EOP is representing end of
>>>>> packet (a MPDU frame), right?
>>>>>
>>>>>> 2) Hmm.. is it failing in STA mode as well? if yes then it's regression.
>>>>> Yes, STA mode also failed.
>>>>
>>>>
>>>>
>>>> --
>>>> Best regards,
>>>> Eugene
>>
>>
>>
>> --
>> Best regards,
>> Eugene
>
>
>
> --
> Best regards,
> Eugene



-- 
Best regards,
Eugene