Auth/Ass is merged

[Eugene Krasnikov]

> And I was able to ping after setting manual IPs:

Nice! Just FYI "dhcpcd wlan0" will run DHCP over the interface

> Naturally there are issues, for example first connect call failed and RX
> stopped working in a minute or so. But we will fix those.

Could you please describe in more details what king of issue is this?
Share SMD/DXE logs? File bug in github?:)

2013/5/1 Kalle Valo <kvalo at qca.qualcomm.com>:
> Eugene Krasnikov <k.eugene.e at gmail.com> writes:
>
>> Yeah, i merged all fixes to make ping working. To run dhcp over
>> interface just run "dhcpcd wlan0". Please check if you can send data
>> on your devices?
>
> I have been now able to associate, without encryption of course, on mako
> (nexus 4) running cm-10.1:
>
> <6>[  435.392644] wlan0: associated
>
> 1|shell at android:/ # /dev/iw wlan0 link
> Connected to 00:03:7f:40:82:dd (on wlan0)
>         SSID: valo-pb92
>         freq: 2412
>         RX: 696228 bytes (9052 packets)
>         signal: 1 dBm
>         tx bitrate: 1.0 MBit/s
>
>         bss flags:      short-slot-time
>         dtim period:    2
>         beacon int:     100
>
> And I was able to ping after setting manual IPs:
>
> 64 bytes from 172.22.71.2: icmp_seq=1 ttl=64 time=3.29 ms
> 64 bytes from 172.22.71.2: icmp_seq=2 ttl=64 time=3.05 ms
> 64 bytes from 172.22.71.2: icmp_seq=3 ttl=64 time=3.11 ms
>
> Naturally there are issues, for example first connect call failed and RX
> stopped working in a minute or so. But we will fix those.
>
> This is a great milestone to reach, great work! Now let's make this a
> top notch driver :)
>
> --
> Kalle Valo



-- 
Best regards,
Eugene