[PATCH] ipq40xx: google (gale) add LED aliases

[openwrt at aiyionpri.me]

From: Jan-Niklas Burfeind <git at aiyionpri.me>

this is similar to
commit 583ac0e11df7 ("mpc85xx: update lp5521 led-controller node for
5.10")

Google uses white for running and red for an issue

Signed-off-by: Jan-Niklas Burfeind <git at aiyionpri.me>
---
Good morning.

Currently the tristate LED does not have an assigned function,
while it does have several in stock firmware.

Once the multi-intensity section becomes active, the device should use
white/blueish light as running indicator.
For now blue is used for LED_RUNNING.

If there's a way to use white instead of blue, just let me know;
I'd gladly fix that at once.

Thanks for reviewing this,
Aiyion

 .../files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts     | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts
index e4f47431e5..f92c289738 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts
@@ -15,6 +15,10 @@
 
 	aliases {
 		label-mac-device = &gmac0;
+		led-boot = &led0_blue;
+		led-failsafe = &led0_red;
+		led-running = &led0_blue;
+		led-upgrade = &led0_red;
 	};
 
 	chosen {
@@ -255,12 +259,13 @@
 		clock-mode = /bits/ 8 <1>;
 
 #if 1
-		led at 0 {
+		led0_red: led at 0 {
 			reg = <0>;
 			chan-name = "LED0_Red";
 			led-cur = /bits/ 8 <0x64>;
 			max-cur = /bits/ 8 <0x78>;
 			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_FAULT;
 		};
 
 		led at 1 {
@@ -271,12 +276,13 @@
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
-		led at 2 {
+		led0_blue: led at 2 {
 			reg = <2>;
 			chan-name = "LED0_Blue";
 			led-cur = /bits/ 8 <0x64>;
 			max-cur = /bits/ 8 <0x78>;
 			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
 		};
 #else
 		/*
@@ -285,6 +291,7 @@
 		 * # echo 255 > /sys/class/leds/tricolor/brightness
 		 */
 		multi-led at 2 {
+			function = LED_FUNCTION_POWER;
 			reg = <2>;
 			color = <LED_COLOR_ID_RGB>;
 			#address-cells = <1>;
-- 
2.40.0