[OpenWrt-Devel] [PATCH v2 1/2] ramips/mt762x: convert devices to interrupt-driven gpio-keys

[John Crispin]

On 21/10/2019 14:30, Adrian Schmutzler wrote:
> Hi John,
> 
>> -----Original Message-----
>> From: John Crispin [mailto:john at phrozen.org]
>> Sent: Montag, 21. Oktober 2019 14:19
>> To: Adrian Schmutzler <freifunk at adrianschmutzler.de>; openwrt-devel at lists.openwrt.org
>> Subject: Re: [OpenWrt-Devel] [PATCH v2 1/2] ramips/mt762x: convert devices to interrupt-driven gpio-keys
>>
>>
>> On 21/10/2019 14:17, John Crispin wrote:
>>> On 20/09/2019 14:03, Adrian Schmutzler wrote:
>>>> This converts all remaining devices to use interrupt-driven
>>>> gpio-keys compatible instead of gpio-keys-polled.
>>>> The poll-interval is removed.
>>>>
>>>> While at it, add/remove newlines in keys and leds node where
>>>> necessary.
>>>>
>>>> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
>>>
>>> Hi,
>>> was there not an issue on some of the older ralink silicon versions that
>>> made irq unreliable, which is why we never changed this ?
>>>       John
>> this only touches the mtk silicon ...
> 
> I obviously cannot prove that this will work on all devices, but I have seen several device support PRs for mt7620/mt7621/mt7628 with gpio-keys working (=tested) over the last half year.
> I intentionally only included mt76xx here, as I have no idea whether this will work on rtxxxx, and if I remember correctly 100 % of them still have gpio-keys-polled set.
> 
> Best
> 
> Adrian
> 
the code works reliably on mt76xx silicon, some of the older silicon did 
not have functional irq on all pins
	John

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel