[OpenWrt-Devel] Custom build with reghack on trunk or any branch

Tom Psyborg pozega.tomislav at gmail.com
Thu Jul 20 16:41:29 EDT 2017


you are probably using outdated patch

On 20 July 2017 at 21:21, Jenny Cabrera Varona <jenny.cabrera at reduc.edu.cu>
wrote:

> this is the info on my device right now, after some changes trying to get
> works with 2312-2732MHz
>
> # iw reg get
> country 00: DFS-UNSET
>         (2302 - 2732 @ 40), (N/A, 30), (N/A)
>         (5735 - 5835 @ 80), (N/A, 30), (N/A)
>
> Using default US
> # dmesg | more
> [   10.700000] ath: EEPROM regdomain: 0x0
> [   10.700000] ath: EEPROM indicates default country code should be used
> [   10.700000] ath: doing EEPROM country->regdmn map search
> [   10.700000] ath: country maps to regdmn code: 0x3a
> [   10.700000] ath: Country alpha2 being used: US
> [   10.700000] ath: Regpair used: 0x3a
> [   10.710000] ieee80211 phy0: Selected rate control algorithm
> 'minstrel_ht'
> [   10.730000] cfg80211: Calling CRDA for country: US
> [   10.740000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40
> [   10.760000] cfg80211: Regulatory domain changed to country: US
> [   10.760000] cfg80211:  DFS Master region: FCC
> [   10.770000] cfg80211:   (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [   10.780000] cfg80211:   (2302000 KHz - 2732000 KHz @ 40000 KHz), (N/A,
> 3000 mBm), (N/A)
> [   10.780000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
> 3000 mBm), (N/A)
>
> Using country 00:
>
> [ 1001.980000] cfg80211: Calling CRDA to update world regulatory domain
> [ 1002.000000] cfg80211: World regulatory domain updated:
> [ 1002.000000] cfg80211:  DFS Master region: unset
> [ 1002.010000] cfg80211:   (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 1002.020000] cfg80211:   (2302000 KHz - 2732000 KHz @ 40000 KHz), (N/A,
> 3000 mBm), (N/A)
> [ 1002.020000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
> 3000 mBm), (N/A)
>
> # iw list
> Frequencies:
>                         * 2412 MHz [1] (21.0 dBm)
>                         * 2417 MHz [2] (26.0 dBm)
>                         * 2422 MHz [3] (26.0 dBm)
>                         * 2427 MHz [4] (26.0 dBm)
>                         * 2432 MHz [5] (26.0 dBm)
>                         * 2437 MHz [6] (26.0 dBm)
>                         * 2442 MHz [7] (26.0 dBm)
>                         * 2447 MHz [8] (26.0 dBm)
>                         * 2452 MHz [9] (26.0 dBm)
>                         * 2457 MHz [10] (26.0 dBm)
>                         * 2462 MHz [11] (21.0 dBm)
>                         * 2467 MHz [12] (26.0 dBm)
>                         * 2472 MHz [13] (26.0 dBm)
>                         * 2484 MHz [14] (26.0 dBm)
>
>
> Please someone can tell me why i can't see the others Frequencies in list
> ???
> remember that i need to use 2312-2732MHz
>
> Thanks very much
>
> -----------------------------------------------------------------
> ---- Universidad de Camagüey "Ignacio Agramonte Loynaz", Cuba ---
> -----------------------------------------------------------------
> ---- https://intranet.reduc.edu.cu/ -----------------------------
> ---- https://www.reduc.edu.cu/ ----------------------------------
> -----------------------------------------------------------------
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20170720/96fd7aca/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list