<div dir="ltr">you are probably using outdated patch</div><div class="gmail_extra"><br><div class="gmail_quote">On 20 July 2017 at 21:21, Jenny Cabrera Varona <span dir="ltr"><<a href="mailto:jenny.cabrera@reduc.edu.cu" target="_blank">jenny.cabrera@reduc.edu.cu</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">this is the info on my device right now, after some changes trying to get<br>
works with 2312-2732MHz<br>
<br>
# iw reg get<br>
country 00: DFS-UNSET<br>
(2302 - 2732 @ 40), (N/A, 30), (N/A)<br>
(5735 - 5835 @ 80), (N/A, 30), (N/A)<br>
<br>
Using default US<br>
# dmesg | more<br>
[ 10.700000] ath: EEPROM regdomain: 0x0<br>
[ 10.700000] ath: EEPROM indicates default country code should be used<br>
[ 10.700000] ath: doing EEPROM country->regdmn map search<br>
[ 10.700000] ath: country maps to regdmn code: 0x3a<br>
[ 10.700000] ath: Country alpha2 being used: US<br>
[ 10.700000] ath: Regpair used: 0x3a<br>
[ 10.710000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'<br>
[ 10.730000] cfg80211: Calling CRDA for country: US<br>
[ 10.740000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40<br>
[ 10.760000] cfg80211: Regulatory domain changed to country: US<br>
[ 10.760000] cfg80211: DFS Master region: FCC<br>
[ 10.770000] cfg80211: (start_freq - end_freq @ bandwidth),<br>
(max_antenna_gain, max_eirp), (dfs_cac_time)<br>
[ 10.780000] cfg80211: (2302000 KHz - 2732000 KHz @ 40000 KHz), (N/A,<br>
3000 mBm), (N/A)<br>
[ 10.780000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,<br>
3000 mBm), (N/A)<br>
<br>
Using country 00:<br>
<br>
[ 1001.980000] cfg80211: Calling CRDA to update world regulatory domain<br>
[ 1002.000000] cfg80211: World regulatory domain updated:<br>
[ 1002.000000] cfg80211: DFS Master region: unset<br>
[ 1002.010000] cfg80211: (start_freq - end_freq @ bandwidth),<br>
(max_antenna_gain, max_eirp), (dfs_cac_time)<br>
[ 1002.020000] cfg80211: (2302000 KHz - 2732000 KHz @ 40000 KHz), (N/A,<br>
3000 mBm), (N/A)<br>
[ 1002.020000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,<br>
3000 mBm), (N/A)<br>
<br>
# iw list<br>
Frequencies:<br>
* 2412 MHz [1] (21.0 dBm)<br>
* 2417 MHz [2] (26.0 dBm)<br>
* 2422 MHz [3] (26.0 dBm)<br>
* 2427 MHz [4] (26.0 dBm)<br>
* 2432 MHz [5] (26.0 dBm)<br>
* 2437 MHz [6] (26.0 dBm)<br>
* 2442 MHz [7] (26.0 dBm)<br>
* 2447 MHz [8] (26.0 dBm)<br>
* 2452 MHz [9] (26.0 dBm)<br>
* 2457 MHz [10] (26.0 dBm)<br>
* 2462 MHz [11] (21.0 dBm)<br>
* 2467 MHz [12] (26.0 dBm)<br>
* 2472 MHz [13] (26.0 dBm)<br>
* 2484 MHz [14] (26.0 dBm)<br>
<br>
<br>
Please someone can tell me why i can't see the others Frequencies in list ???<br>
remember that i need to use 2312-2732MHz<br>
<br>
Thanks very much<br>
<br>
------------------------------<wbr>------------------------------<wbr>-----<br>
---- Universidad de Camagüey "Ignacio Agramonte Loynaz", Cuba ---<br>
------------------------------<wbr>------------------------------<wbr>-----<br>
---- <a href="https://intranet.reduc.edu.cu/" rel="noreferrer" target="_blank">https://intranet.reduc.edu.cu/</a> -----------------------------<br>
---- <a href="https://www.reduc.edu.cu/" rel="noreferrer" target="_blank">https://www.reduc.edu.cu/</a> ------------------------------<wbr>----<br>
------------------------------<wbr>------------------------------<wbr>-----<br>
______________________________<wbr>_________________<br>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org">openwrt-devel@lists.openwrt.<wbr>org</a><br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" rel="noreferrer" target="_blank">https://lists.openwrt.org/cgi-<wbr>bin/mailman/listinfo/openwrt-<wbr>devel</a><br>
</blockquote></div><br></div>