[OpenWrt-Devel] CPE510 V1.1 EU version bricked after flashing current trunk

Tiziano Bacocco tizbac2 at gmail.com
Thu Jul 6 21:13:01 EDT 2017


I've patched safeloader tools to support EU version of this rouer, and the
flashed a trunk image, after flashing that, i get a kernel panic related to
interrupts at boot , and the bootloader is unuseable,

TFTP recovery fails always with incorrect file both with official and
openwrt images

Trying to access the console results in safeloader asking a password which
is not admin

TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check..  PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0x4017)
Data flash init failed.
open user-config failed.
open user-config failed.

Input Password: **

Any ideas?
I've found a dump posted on some deutsch forum
http://www0.xup.in/exec/xddl.php?fid=20339772&fname=cpe210-flash.7z&uid=0&key=

it is for cpe210 , but i can't find a way to decrypt the bootloader and
find out which is the password
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20170707/306fd8aa/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list